Useful Glossary in the Wireless World
Whether you are a mobile phone user or an owner of a handheld device or smart phone, you may encounter technical and industry-specific terms like GSM, CDMA, WAP, MMS, SMS, GPRS (2.5G), 3G, Wi-Fi and bluetooth. To have a better understanding of the wireless world we're in, let us take a look at these technologies in turn.
GSM (Global System for Mobile communication) is a digital mobile telephone system that is widely used in Europe and other parts of the world. GSM uses a variation of time division multiple access (TDMA) and is the most widely used of the three digital wireless telephone technologies (TDMA, GSM, and CDMA). GSM digitizes and compresses data, then sends it down a channel with two other streams of user data, each in its own time slot. It operates at either the 900 MHz or 1800 MHz frequency band.
GSM is the de facto wireless telephone standard in Europe. GSM has over 120 million users worldwide and is available in 120 countries, according to the GSM MoU Association. Since many GSM network operators have roaming agreements with foreign operators, users can often continue to use their mobile phones when they travel to other countries.
American Personal Communications (APC), a subsidiary of Sprint, is using GSM as the technology for a broadband personal communications service (PCS). The service will ultimately have more than 400 base stations for the palm-sized handsets that are being made by Ericsson, Motorola, and Nokia. The handsets include a phone, a text pager, and an answering machine.
GSM together with other technologies is part of an evolution of wireless mobile telecommunication that includes High-Speed Circuit-Switched Data (HCSD), General Packet Radio System (GPRS), Enhanced Data GSM Environment (EDGE), and Universal Mobile Telecommunications Service (UMTS).
CDMA (Code-Division Multiple Access) refers to any of several protocols used in so-called second-generation (2G) and third-generation (3G) wireless communications. As the term implies, CDMA is a form of multiplexing, which allows numerous signals to occupy a single transmission channel, optimizing the use of available bandwidth. The technology is used in ultra-high-frequency (UHF) cellular telephone systems in the 800-MHz and 1.9-GHz bands.
CDMA employs analog-to-digital conversion (ADC) in combination with spread spectrum technology. Audio input is first digitized into binary elements. The frequency of the transmitted signal is then made to vary according to a defined pattern (code), so it can be intercepted only by a receiver whose frequency response is programmed with the same code, so it follows exactly along with the transmitter frequency. There are trillions of possible frequency-sequencing codes; this enhances privacy and makes cloning difficult.
The CDMA channel is nominally 1.23 MHz wide. CDMA networks use a scheme called soft handoff, which minimizes signal breakup as a handset passes from one cell to another. The combination of digital and spread-spectrum modes supports several times as many signals per unit bandwidth as analog modes. CDMA is compatible with other cellular technologies; this allows for nationwide Roaming.
The original CDMA standard, also known as CDMA One and still common in cellular telephones in the U.S., offers a transmission speed of only up to 14.4 Kbps in its single channel form and up to 115 Kbps in an eight-channel form. CDMA2000 and wideband CDMA deliver data many times faster.
CDMA2000, also known as IMT-CDMA Multi-Carrier or 1xRTT, is a code-division multiple access (CDMA) version of the IMT-2000 standard developed by the International Telecommunication Union (ITU). The CDMA2000 standard is third-generation (3-G) mobile wireless technology.
CDMA2000 can support mobile data communications at speeds ranging from 144 Kbps to 2 Mbps. Versions have been developed by Ericsson and Qualcomm. As of mid-2003, the CDMA Development Group reports that more than 50 CDMA2000 networks have been deployed.
W-CDMA (Wideband Code-Division Multiple Access), an ITU standard derived from Code-Division Multiple Access (CDMA), is officially known as IMT-2000 direct spread. W-CDMA is a third-generation (3G) mobile wireless technology that promises much higher data speeds to mobile and portable wireless devices than commonly offered in today's market.
W-CDMA can support mobile/portable voice, images, data, and video communications at up to 2 Mbps (local area access) or 384 Kbps (wide area access). The input signals are digitized and transmitted in coded, spread-spectrum mode over a broad range of frequencies. A 5 MHz-wide carrier is used, compared with 200 kHz-wide carrier for narrowband CDMA.
WAP (Wireless Application Protocol) is a specification for a set of communication protocols to standardize the way that wireless devices, such as cellular telephones and radio transceivers, can be used for Internet access, including e-mail, the World Wide Web, newsgroups, and Internet Relay Chat (IRC). While Internet access has been possible in the past, different manufacturers have used different technologies. In the future, devices and service systems that use WAP will be able to interoperate.
The WAP layers are:
-
Wireless Application Environment (WAE)
-
Wireless Session Layer (WSL)
-
Wireless Transport Layer Security (WTLS)
-
Wireless Transport Layer (WTP)
The WAP was conceived by four companies: Ericsson, Motorola, Nokia, and Unwired Planet (now Phone.com). The Wireless Markup Language (WML) is used to create pages that can be delivered using WAP.
There are other approaches to an industry standard besides WAP, including i-Mode (please see below).
i-Mode is the packet-based service for mobile phones offered by Japan's leader in wireless technology, NTT DoCoMo. Unlike most of the key players in the wireless arena, i-Mode eschews the Wireless Application Protocol (WAP) and uses a simplified version of HTML, Compact Wireless Markup Language (CWML) instead of WAP's Wireless Markup Language (WML). NTT DoCoMo has said that eventually it will support WAP and WML, but the company has not said exactly when this will happen.
First introduced in 1999, i-Mode was the world's first smart phone for Web browsing. The i-Mode wireless data service offers color and video over many phones. Its mobile computing service enables users to do telephone banking, make airline reservations, conduct stock transactions, send and receive e-mail, and have access to the Internet. As of early 2000, i-Mode had an estimated 5.6 million users.
Multimedia Messaging Service (MMS) - sometimes called Multimedia Messaging System - is a communications technology developed by 3GPP (Third Generation Partnership Project) that allows users to exchange multimedia communications between capable mobile phones and other devices. A successor to the Short Message Service (SMS) protocol, MMS defines a way to send and receive, almost instantaneously, wireless messages that include images, audio, and video clips in addition to text. When the technology has been fully developed, it will support the transmission of streaming video. A common current application of MMS messaging is picture messaging (the use of camera phones to take photos for immediate delivery to a mobile recipient). Other possibilities include animations and graphic presentations of stock quotes, sports news, and weather reports.
According to MobileStreams, MMS will be developed in two separate phases. Based on General Packet Radio Services (GPRS), the currently available MMS is similar to a brief PowerPoint presentation. The second phase of MMS will require a 3G network to enable streaming video. An intermediate technology, Enhanced Messaging Service (EMS) has more capabilities than SMS, but fewer than MMS. Unlike MMS, EMS doesn't require upgrades to network infrastructures. Unlike SMS and EMS, the size of an MMS message is unlimited, although service providers are likely to impose their own size restrictions.
MMS-capable devices are available from a number of vendors, including Ericsson, Motorola and Nokia.
Short Message Service (SMS) is a service for sending messages of up to 160 characters (224 characters if using a 5-bit mode) to mobile phones that use Global System for Mobile (GSM) communication. GSM and SMS service is primarily available in Europe. SMS is similar to paging. However, SMS messages do not require the mobile phone to be active and within range and will be held for a number of days until the phone is active and within range. SMS messages are transmitted within the same cell or to anyone with roaming service capability. They can also be sent to digital phones from a Web site equipped with PC Link or from one digital phone to another. Typical uses of SMS include:
-
Notifying a mobile phone owner of a voicemail message
-
Notifying a salesperson of an inquiry and contact to call
-
Notifying a doctor of a patient with an emergency problem
-
Notifying a service person of the time and place of their next call
-
Notifying a driver of the address of the next pickup
An SMS gateway is a Web site that lets you enter an SMS message to someone within the cell served by that gateway or that acts as an international gateway for users with roaming capability.
General Packet Radio Services (GPRS) is often described as "2.5G" - that is, a technology between the second generation (2G) and third generation (3G) of mobile telephony. It is a packet-based wireless communication service that promises data rates from 56 up to 114 Kbps and continuous connection to the Internet for mobile phone and computer users. The higher data rates will allow users to take part in video conferences and interact with multimedia Web sites and similar applications using mobile handheld devices as well as notebook computers. GPRS is based on Global System for Mobile (GSM) communication and will complement existing services such as circuit-switched cellular phone connections and the Short Message Service (SMS).
In theory, GPRS packet-based service should cost users less than circuit-switched services since communication channels are being used on a shared-use, as-packets-are-needed basis rather than dedicated only to one user at a time. It should also be easier to make applications available to mobile users because the faster data rate means that middleware currently needed to adapt applications to the slower speed of wireless systems will no longer be needed. As GPRS becomes available, mobile users of a virtual private network (VPN) will be able to access the private network continuously rather than through a dial-up connection.
GPRS will also complement Bluetooth, a standard for replacing wired connections between devices with wireless radio connections. In addition to the Internet Protocol (IP), GPRS supports X.25, a packet-based protocol that is used mainly in Europe. GPRS is an evolutionary step toward Enhanced Data GSM Environment (EDGE) and Universal Mobile Telephone Service (UMTS).
3G is an abbreviation for third-generation wireless. The third generation, as its name suggests, follows the first generation (1G) and second generation (2G) in wireless communications. The 1G period began in the late 1970s and lasted through the 1980s. These systems featured the first true mobile phone systems, known at first as "cellular mobile radio telephone." These networks used analog voice signaling, and were little more sophisticated than repeater networks used by amateur radio operators. The 2G phase began in the 1990s, and much of this technology is still in use. The 2G cell phone features digital voice encoding. Examples include CDMA, TDMA, and GSM. Since its inception, 2G technology has steadily improved, with increased bandwidth, packet routing, and the introduction of multimedia.
3G include capabilities and features such as:
-
Enhanced multimedia (voice, data, video, and remote control)
-
Usability on all popular modes (cellular telephone, e-mail, paging, fax, videoconferencing, and Web browsing)
-
Broad bandwidth and high speed (upwards of 2 Mbps)
-
Routing flexibility (repeater, satellite, LAN)
-
Operation at approximately 2 GHz transmit and receive frequencies
-
Roaming capability throughout Europe, Japan, and North America
While 3G is generally considered applicable mainly to mobile wireless, it is also relevant to fixed wireless and portable wireless. The ultimate 3G system might be operational from any location on, or over, the earth's surface, including use in homes, businesses, government offices, medical establishments, the military, personal and commercial land vehicles, private and commercial watercraft and marine craft, private and commercial aircraft (except where passenger use restrictions apply), portable (pedestrians, hikers, cyclists, campers), and space stations and spacecraft.
Bluetooth is a telecommunications industry specification that describes how mobile phones, computers, and personal digital assistants (PDAs) can be easily interconnected using a short-range wireless connection. Using this technology, users of cellular phones, pagers, and personal digital assistants can buy a three-in-one phone that can double as a portable phone at home or in the office, get quickly synchronized with information in a desktop or notebook computer, initiate the sending or receiving of a fax, initiate a print-out, and, in general, have all mobile and fixed computer devices be totally coordinated.
Bluetooth requires that a low-cost transceiver chip be included in each device. The transceiver transmits and receives in a previously unused frequency band of 2.45 GHz that is available globally (with some variation of bandwidth in different countries). In addition to data, up to three voice channels are available. Each device has a unique 48-bit address from the IEEE 802 standard. Connections can be point-to-point or multipoint. The maximum range is 10 meters. Data can be exchanged at a rate of 1 megabit per second (up to 2 Mbps in the second generation of the technology). A frequency hop scheme allows devices to communicate even in areas with a great deal of electromagnetic interference. Built-in encryption and verification is provided.
The technology got its unusual name in honor of Harald Bluetooth, king of Denmark in the mid-tenth century.
Wi-Fi (short for "wireless fidelity") is a term for certain types of wireless local area network (WLAN) that use specifications in the 802.11 family. The term Wi-Fi was created by an organization called the Wi-Fi Alliance, which oversees tests that certify product interoperability. A product that passes the alliance tests is given the label "Wi-Fi certified" (a registered trademark).
Originally, Wi-Fi certification was applicable only to products using the 802.11b standard. Today, Wi-Fi can apply to products that use any 802.11 standard. The 802.11 specifications are part of an evolving set of wireless network standards known as the 802.11 family. The particular specification under which a Wi-Fi network operates is called the "flavor" of the network. Wi-Fi has gained acceptance in many businesses, agencies, schools, and homes as an alternative to a wired LAN. Many airports, hotels, and fast-food facilities offer public access to Wi-Fi networks. These locations are known as hot spots. Many charge a daily or hourly rate for access, but some are free. An interconnected area of hot spots and network access points is known as a hot zone.
Unless adequately protected, a Wi-Fi network can be susceptible to access by unauthorized users who use the access as a free Internet connection. The activity of locating and exploiting security-exposed wireless LANs is called war driving. An identifying iconography, called war chalking, has evolved. Any entity that has a wireless LAN should use security safeguards such as the Wired Equivalent Privacy (WEP) encryption standard, the more recent Wi-Fi Protected Access (WPA), Internet Protocol Security (IPsec), or a virtual private network (VPN).
Resource: whatis.com