Eng · 繁體 · 简体

Dr. Richard Y.K. FUNG

BSc-ProdE(Aston), MPhil(Aston), PhD(Loughborough), CEng(UK), MIET(UK), MHKIE, CFPIM, MISMHK

Associate Professor

Contact Information

Office: YEUNG-Y6618
Phone: +(852)-3442-8413
Email: meykfung@cityu.edu.hk

Research Interests

  • Logistics Systems
  • Market-focused Operations
  • Freight Management
  • Supply Chain Management

Education

Date Title Discipline Name of Institution
1976 Higher Diploma Production Engineering Hong Kong Polytechnic, HK
1978 B.Sc. (Hons) Production Engineering University of Aston, UK
1983 M.Phil. Manufacturing Resource Planning University of Aston, UK
1997 Ph.D. Customer Requirements Management Loughborough University, UK

Honours / Awards

2012 Honorary International Chair Professor,
Department of Industrial Engineering and Management,
College of Management, National Taipei University of Technology, Taipei, Taiwan, R.O.C.
2011 Visiting Chair Professor,
TEDA College, Nankai University, Tianjin, China
2002 Erskine Fellow,
University of Canterbury, Christchurch, New Zealand

Internal Committee

  • Deputy Director, Co-operative Education Centre, Faculty of Science and Engineering
  • Programme Leader, BEng (Hons) e-Logistics and Technology Management

External Committee

  • Member, Council of the Institute for Supply Management (ISM), Hong Kong Chapter
  • External advisor, the Importation of Worker Division, Labour Department, HKSAR Government
  • External Supervisor, Graduate Training Scheme A, HKIE
  • Member, Professional Assessment Panel for IEE membership
  • Member, Professional Assessment Panel for HKIE membership
  • Elected Member, Executive Council of the Hong Kong Professional Teachers' Union

Membership

Chartered Engineer Engineering Council, UK (CEng)
Member The Institution of Production Engineers, UK (MIProdE)
Member The Institution of Electrical Engineers, UK (MIEE)
Member The Institution of Engineering and Technology, UK (MIET)
Member The Hong Kong Institution of Engineers (MHKIE)
Fellow, CFPIM Certified Fellow in Production and Inventory Management
American Production and Inventory Control Society (APICS)
Member Institute for Supply Management (ISM), USA
Council Member Institute for Supply Management (Hong Kong Chapter)
External Supervisor HKIE Graduate Training Scheme A for Nypro Tool (HK) Ltd.
Assessor HKIE, Professional Assessment Panel for Corporate / Associate
Membership, Manufacturing & Industrial Engineering Discipline
Assessor IEE(UK), Professional Assessment Panel for Corporate / Associate
Membership, Manufacturing & Industrial Engineering Discipline
Member Hong Kong Professional Teachers' Union
Elected CityU Representative Executive Council, Hong Kong Professional Teachers' Union

Working Experience

1989-Present City University of Hong Kong -- Senior Lecturer / Associate Professor
1986-89 Handley Walker Group Plc., UK. -- Senior Consultant
1982-86 Production Engg. Research Association, PERA, UK -- Senior Engineer
1980-82 Bentley Textile Machinery Limited, UK -- Project Engineer
1978-80 Ferranti Limited, UK -- Production Engineer

Editorial Board Services

1994 - 1998 Associate Editor, Journal of Design and Manufacturing Automation
1998 - 2002 Associate Editor, Journal of Engineering Design & Automation
2000 - 2003 Editor, International Journal of Industrial Engineering Research (IJIER)
2003 - Member of Editorial Board and Referee, International Journal of Electronic Business Management
2006 Guest Editor, Special Issue on Green Manufacturing, International Journal of Electronics Business Management, Vol. 4, No. 4, 2006.
2009 - Member of Editorial Board and Referee, Journal of the Asia Pacific Business Innovation and Technology Management
2009 - Member of Editorial Board and Referee, Journal of the Philippine Institute of Industrial Engineers
2010 Member of Editorial Board, International Conference on Intelligent Systems, Structures and Facilities, January, 2010, Hong Kong
2010 Organising Committee, The 4th International Conference on New Trends in Information Science and Service Science (NISS), May 11-13, 2010, Gyeongju, Korea
2010 - Editor-in-Chief, International Journal of Information Processing and Management (IJIPM)
2010 - Associate Editor-in-Chief, Journal of Next Generation Information Technology (JNIT)
2010 - Associate Editor-in-Chief, International Journal on Advances in Information Sciences and Service Sciences (AISS)

Selected Publications

  1. Zhang L., Tian, J., Fung, R.Y.K. and Dang C., "Materials procurement and reserves policies for humanitarian logistics with recycling and replenishment mechanisms”, Computers & Industrial Engineering. (DOI: 10.1016/j.cie.2018.11.013)
  2. Zhang L., Tian, J., Dang C. and Fung, R.Y.K., "On equilibrium performance assurance with costly monitoring", Expert Systems with Applications, Vol. 110, No. 26, November 15, 2018, pp 93-105. (DOI: 10.1016/j.eswa.2018.05.025)
  3. Xia B., Fung, R.Y.K. and Guo, J., “Quality Investing and Pricing Strategies by Startups: Impacts of Demand Uncertainties and Capital constraint”, Discrete Dynamics in Nature and Society, Article ID 8302645, Volume 2018 (2018). (DOI: 10.1155/2018/8302645)
  4. Feng, P., Wu, F., Fung, R.Y.K. and Jia, T., “Evaluation of two transshipment policies in a two-location decentralized inventory system under partial backordering”, Transportation Research Part E: Logistics and Transportation Review, Vol. 118, October 2018, pp. 207–224. (DOI: 10.1016/j.eswa.2018.05.025)
  5. Xia, B., Guo, J. and Fung, R.Y.K., “Quality investment timing by the startup and the established firm”, Managerial and Decision Economics. Vol. 39, No. 3, April 1, 2018, pp. 275-284. (DOI: 10.1002/mde.2902)
  6. Wang, Z.Q., Fung, R.Y.K., Li, Y.L. and Pu, Y., “An integrated decision-making approach for designing and selecting product concepts based on QFD and Cumulative Prospect Theory”, International Journal of Production Research. Vol. 56, No. 5, Online July 14, 2017, pp. 2003-2018. (DOI:10.1080/00207543.2017.1351632)
  7. Wu, Y., Feng, G. and Fung, R.Y.K., “Comparison of information security decisions under different security and business environments”, Journal of the Operational Research Society. Vol. 69, No. 5, 2018, pp. 747-761. (DOI: 10.1057/s41274-017-0263-y)
  8. Li, X., Wang, J. and Fung, R.Y.K., “Approximate Dynamic Programming Approaches for Appointment Scheduling with Patient Preferences”, Artificial Intelligence in Medicine, Vol. 85, April 2018, pp. 16-25.
  9. Li, X. and Fung, R.Y.K., “A Dynamic Scheduling Algorithm for Single-Arm Two-Cluster Tools with Flexible Processing Times”, Engineering Optimization, Vol. 50, No. 2, 2018, pp. 329-346. (DOI: 10.1080/0305215X.2017.1310209)
  10. Shi J., Guo, J. and Fung, R.Y.K., “Decision support system for purchasing management of seasonal products: A capital-constrained retailer perspective”, Expert Systems With Applications, Vol. 80, No. 1, Sept. 2017, pp. 171–182. (DOI: 10.1016/j.eswa.2017.03.032)
  11. Wu, Y., Fung, R.Y.K., Feng, G. and Wang, N., “Decisions making in information security outsourcing: impact of complementary and substitutable firms”, Computers & Industrial Engineering, Vol. 110, August 1, 2017, pp. 1 – 12. (DOI: 10.1016/j.cie.2017.05.018)
  12. Li, X. and Fung, R.Y.K., “Optimal Multi-Degree Cyclic Solution of Multi-Hoist Scheduling Without Overlapping”, IEEE Transactions on Automation Science and Engineering, Vol. 14, No. 2, April 2017, pp. 1064–1074. (DOI: 10.1109/TASE.2015.2478482)
  13. Feng, P., Fung, R.Y.K. and Wu, F., “Preventive transshipment decisions in a multi-location inventory system with dynamic approach”, Computers & Industrial Engineering, Vol. 104, Issue C, February 1, 2017, pp.1 –8. (DOI: 10.1016/j.cie.2016.12.005)
  14. Li, X. and Fung, R.Y.K., “Optimal K-Unit Cycle Scheduling of Two-Cluster Tools with Residency Constraints and General Robot Moving Times”, Journal of Scheduling, Vol. 19, No. 2, April 2016, pp.165 –176. (DOI:10.1007/s10951-015-0448-7)
  15. Liang, F. and Fung, R.Y.K., “Coordination Mechanism in Real-time Scheduling of Virtual Cellular Manufacturing Systems”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (P I MECH ENG B-J ENG, ISSN: 0954-4054), Vol. 230, Issue 3, March 2016, pp. 534–547.
  16. Liang, F., Guo, Y. and Fung, R.Y.K., “Simulation-based Optimization for Surgery Scheduling in Operation Theatre Management Using Response Surface Method”, Journal of Medical Systems, Vol. 39, No. 11, Article 159, Nov 2015. Published Online (DOI:10.1007/s10916-015-0349-5)
  17. Shi J., Fung, R.Y.K. and Guo, J., “Optimal Ordering and Pricing Policies for Seasonal Products: Impacts of Demand Uncertainty and Capital Constraint”, Discrete Dynamics in Nature and Society, Vol. 2016 (Nov. 2016), Article ID 1801658.
  18. Wang, J. and Fung, R.Y.K., “Adaptive dynamic programming algorithms for sequential appointment scheduling with patient preferences”, Artificial Intelligence in Medicine, Vol. 63, No. 1, January 2015, pp. 33-44.
  19. Wang, J. and Fung, R.Y.K., “Dynamic appointment scheduling with patient preferences and choices”, Industrial Management & Data Systems, Vol. 115, No. 4, 2015, pp 700-717. (DOI: 10.1108/IMDS-12-2014-0372)
  20. Wang, Z.Q., Fung, R.Y.K. and Li, Y.L., “A group multi-granularity linguistic-based methodology for prioritizing engineering characteristics under uncertainties”, Computer & Industrial Engineering, Vol. 91, January 2016, pp. 178–187.
  21. Yan, C., Tang, J.F., Jiang B. and Fung, R.Y.K., “Sequential appointment scheduling considering patient choice and service fairness”, International Journal of Production Research, Vol. 53, No. 24, December 2015, pp. 7376-7395.
  22. Yan, C., Tang, J.F., Jiang B. and Fung, R.Y.K., “Comparison of Traditional and Open-Access Appointment Scheduling for Exponentially Distributed Service Time”, Journal of Healthcare Engineering, Vol. 6, No. 3, August 2015, pp. 345-376.
  23. Tang, J.F., Yan, C. and Fung, R.Y.K., “Optimal appointment scheduling with no-shows and exponential service time considering overtime work”, Journal of Management Analytics, Vol. 1, Issue 2, July 2014, pp. 99-129.
  24. Wang, J. and Fung, R.Y.K., “Adaptive dynamic programming algorithms for sequential appointment scheduling with patient preferences”, Artificial Intelligence in Medicine, Vol. 63, No. 1, 2015, pp. 33-44.
  25. Zhou B.H., Li, X. and Fung, R.Y.K., “Dynamic scheduling of photolithography process based on Kohonen neural network”, Journal of Intelligent Manufacturing, Vol. 26, 2015, pp. 73–85.
  26. Wang, Y., Tang, J.F. and Fung, R.Y.K., “A column-generation-based heuristic algorithm for solving operating theater planning problem under stochastic demand and surgery cancellation risk”, International Journal of Production Economics, Vol. 158 , No. 1, 2014, pp. 28-36.
  27. Wang, X. and Fung, R.Y.K., “An Option-based Hedging Mechanism for Managing the Risk of Overbooking in Parallel Airline Alliances”, Transportation Research Part E: Logistics and Transportation Review, Vol. 70, Issue 1, October, 2014, pp. 146–162.
  28. Yang, W. and Fung R.Y.K., “An available-to-promise decision support system for a multi-site make-to-order production system”, International Journal of Production Research, Vol. 52, No. 14, July 18, 2014, pp. 4253–4266.
  29. Yang, W. and Fung R.Y.K., “Stochastic optimization model for order acceptance with multiple demand classes and uncertain demand/supply”, Engineering Optimization, Vol. 46, No. 6, 2014, pp. 824–841.
  30. Li, X. and Fung, R.Y.K., “A mixed integer linear programming solution for single hoist multi-degree cyclic scheduling with re-entrance”, Engineering Optimization, Vol. 46, No. 5, 2014, pp. 704–723.
  31. Wang, J. and Fung, R.Y.K., “An Integer Programming Formulation for Outpatient Scheduling with Patient Preference”, Industrial Engineering & Management Systems, Vol. 13, No. 2, June 2014, pp. 193–202.
  32. Zhu, Q. and Fung, R.Y.K., “Incentive contracts in logistics outsourcing”, Frontiers in Artificial Intelligence and Applications, Vol. 252, 2013, pp. 293–302.
  33. Liang, F., Fung, R.Y.K. and Jiang, Z.B., “A Combined Approach of Cycle Time Estimation in Mass Customization Enterprise”, International Journal of Industrial Engineering, Vol. 20, Nos. 9-10, 2013, pp. 574–588.
  34. Zhang, L., Wong, T.N. and Fung, R.Y.K., "A multi-agent system to support heuristic-based dynamic manufacturing rescheduling", Intelligent Decision Technologies, Vol. 7, No. 3, June 2013, pp. 197–211.
  35. Li, Q., Gong, J., Fung, R.Y.K. and Tang, J.F., "Multi-objective Optimal Cross-training Configuration Models for an Assembly Cell Using Non-dominated Sorting Genetic Algorithm-II", International Journal of Computer Integrated Manufacturing, Vol. 25, No. 11, 2013, pp. 981–995.
  36. Fung, R.Y.K., Liu, R. and Jiang, Z.B., "A memetic algorithm for the open capacitated arc routing problem", Transportation Research Part E: Logistics and Transportation Review, Vol. 50, No. 1, February, 2013, pp. 53–67.
  37. Ng, P. and Fung, R.Y.K., "Applying formal concept analysis in prioritizing model-based test scenario", International Journal of Information Processing and Management, Vol. 3, No. 3, 2012, pp. 66-75.
  38. Liu, Y., Jin, J., Ji, P., Harding, J. and Fung, R.Y.K., "Identifying Helpful Online Reviews: A Product Designer's Perspective", Computer-Aided Design, Vol. 45, No. 2, 2013, pp. 180–194.
  39. Fung, R.Y.K. and Jiao R.J., "A Real Option Theoretic Framework for Economic Justification of Product Family Design and Product Platform Development", Journal of The Philippine Institute of Industrial Engineers, Vol. 8, No. 2, December 2011, pp. 1–6.
  40. Liang, F., Fung, R.Y.K. and Jiang, Z.B., "Modeling Approach and Behavior Analysis of Manufacturing Resources in Virtual Cellular Manufacturing Systems Using Resource Element Concept", International Journal of Computer Integrated Manufacturing, Vol. 24, No. 12, 2011, pp. 1168–1182.
  41. Du, Y., Chen, Q., Quan, X., Long, L., and Fung, R.Y.K., "Berth Allocation Considering Fuel Consumption and Vessel Emissions", Transportation Research Part E: Logistics and Transportation Review, Vol. 47, No. 6, 2011, pp. 1021-1037.
  42. Zhang, J., Tang, J.F. and Fung, R.Y.K., "A Scatter search for multi-depot vehicle routing problem with weight-related cost", Asia-Pacific Journal of Operational Research, Vol. 28, No. 3, June, 2011, pp. 323-348.
  43. Ng, P. and Fung, R.Y.K., "Incremental Model-based Test Suite Reduction with Formal Concept Analysis", Journal of Information Processing Systems, Vol. 6, No. 2, June 2010, pp. 197 - 208.
  44. Liu, R., Jiang, Z.B. Fung, R.Y.K., Chen, F. and Liu, X., "Two-phase heuristic algorithms for full truckloads multi-depot capacitated vehicle routing problem in carrier collaboration", Computer & Operations Research, Vol. 37, No. 5, May, 2010, pp. 950 - 959.
  45. Leung, C.W., Wong, T.N., Mak, K.L. and Fung, R.Y.K., "Integrated process planning and scheduling by an agent-based ant colony optimization", Computers & Industrial Engineering, Vol. 59, No. 1, August, 2010, pp. 166 - 180.
  46. Tang, J.F., Pan, Z., Fung, R.Y.K. and Lau, H.C.W., "Vehicle routing problem with fuzzy time windows", Fuzzy Sets and Systems, Vol. 160, No. 5, March, 2009, pp. 683 - 695.
  47. Wang, D.W., Fung, R.Y.K. and Ip, W.H., "An immune-genetic algorithm for introduction planning of new products", Computers & Industrial Engineering, Vol. 56, No. 3, April, 2009, pp. 902-917.
  48. Tang, J.F., Pan, Z., Fung, R.Y.K. and Lau, H.C.W., "Vehicle routing problem with fuzzy time windows", Fuzzy Sets and Systems, Vol. 160, No. 5, March, 2009, pp. 683-695.
  49. Liu, Huiran, Jiang, Z.B. and Fung, R.Y.K., "Performance modeling, real-time dispatching and simulation of wafer fabrication systems using timed extended object-oriented Petri nets", Computers & Industrial Engineering, Vol. 56, No. 1, February, 2009, pp. 121-137.
  50. Pan, Z., Tang, J.F. and Fung, R.Y.K., "Synchronization of Inventory and Transportation under Flexible Vehicle Constraint: A Heuristics Approach Using Sliding Windows and Hierarchical Tree Structure", European Journal of Operational Research, Vol. 192, No. 3, February, 2009, pp. 824-836.
  51. Tang, J.F., Liu, Y. and Fung, R.Y.K., "Industrial Waste Recycling Strategies Optimization Problem: Mixed Integer Programming Model and Heuristics", Engineering Optimization, Vol. 40, No. 12, December 2008, pp. 1085-1110.
  52. Liang, F., Jiang, Z.B. and Fung, R.Y.K., "Job Shop Scheduling Based on Evolving Cellular Automata with Genetic Algorithm", International Journal of Agile Manufacturing, Vol. 10, No. 3, 2008, pp. 8 - 16.
  53. Fung, R.Y.K., Chen, T., Sun, X. and Tu, Y.L., "An Agent-based Infrastructure for Virtual Enterprises using Web-Services Standards", International Journal of Advanced Manufacturing Technology, Vol. 39, 2008, pp. 612-622. (Project Number: 7001716)
  54. Ho, G.T.S., Lau, H.C.W., Chung, S.H., Fung, R.Y.K., Chan, T.M. and Lee, C.K.M., "Fuzzy Rule Sets for Enhancing Quality in a Supply Chain Network ", Industrial Management & Data Systems, Vol. 108, No. 7, 2008, pp. 947-972.
  55. Liang, F., Fung, R.Y.K., Jiang, Z.B. and Wong T.N., "A Hybrid Control Architecture and Coordination Mechanism in Virtual Manufacturing Enterprise", International Journal of Production Research, Vol. 46, No. 13, July 2008, pp. 3641-3663.
  56. Fung, R.Y.K., Chen, Y. and Tang, J.F., "A quality engineering-based approach for conceptual product design", International Journal of Advanced Manufacturing Technology, UK, Vol. 32, No. 11-12, May 2007, pp 1064-1073.
  57. Tu, Y. L., Xie, S. Q. and Fung, R.Y.K., "Product Development Cost Estimation in Mass Customization", IEEE Transactions on Engineering Management, Vol. 54, No. 1, February, 2007, pp. 29-40.
  58. Fung, R.Y.K. and Chong, S.P.Y., "An active styling platform for designing and developing product families", Journal of Intelligent Manufacturing, Vol. 18, No. 1, April, 2007, pp. 47-58.
  59. Ng, P. and Fung, R.Y.K., "Applying Formal Concept Analysis in Requirements Validation with UML State Machine Model", International Journal of Computer & Information Science, Vol. 8, No. 4, December, 2007, pp. 550-559.
  60. Liu, Huiran, Jiang, Z.B. and Fung, R.Y.K., "The infrastructure of the timed EOPNs-based multiple-objective real-time scheduling system for 300mm wafer FAB", International Journal of Production Research, Vol. 45, No. 21, 2007, pp. 5017-5056.
  61. Wong, T.N., Leung, C.W., Mak, K.L. and Fung, R.Y.K., "Dynamic shopfloor scheduling in multi-agent manufacturing systems", Expert Systems With Applications, Vol. 31, No. 3, 2006, pp. 486-494.
  62. Chen, Y., Fung, R.Y.K. and Tang, J.F., "Rating technical attributes in fuzzy QFD by integrating fuzzy weighted average method and fuzzy expected value operator", European Journal of Operational Research, Vol. 174, No. 3, Nov. 2006, pp. 1553-1566.
  63. Fung, R.Y.K., Liu, L. and Liu, Z., "A New LCA Approach Using a Fuzzy Decision-making Methodology", International Journal of Electronic Business Management, Vol. 4, No. 4, 2006, pp. 332-340.
  64. Cheng, W., Fung, R.Y.K., Gong, D.C. and Zhao, Z.B., "A Case Study on Green Product Design and Supplier Chain Management of Taiwan 3C Electronic Industry", International Journal of Electronic Business Management, Vol. 4, No. 4, 2006, pp. 272-284.
  65. Liang, F., Jiang, Z.B., Fung, R.Y.K., Tao, L. and Ma, M., "Rapid configuration of job shop production control system based on soft components technology", International Journal of Advanced Manufacturing Technology, Vol. 30, No. 11-12, Oct., 2006, pp. 1154-1164.
  66. Wong, T.N., Leung, C.W., Mak, K.L. and Fung, R.Y.K., "An agent-based negotiation approach to integrate process planning and scheduling", International Journal of Production Research, UK, Vol. 44, No.7, Apr 2006, pp 1331-1351.
  67. Fung, R.Y.K., Chen, Y. and Tang, J.F., "Estimating the functional relationships for quality function deployment under uncertainties", Fuzzy Sets and Systems, UK, Vol.157, No.1, Jan 2006, pp 98-120.
  68. Wong, T.N., Leung, C.W., Mak, K.L. and Fung, R.Y.K., "Integrated Process Planning and Scheduling/Rescheduling with an agent-based approach", International Journal of Production Research, UK, Vol.44, No.18-19, Oct 2006, pp 3627-3655.
  69. Liu, H., Jiang, Z.B. and Fung, R.Y.K., "Modeling of Large-Scale Complex Re-entrant Manufacturing Systems by Extended Object-oriented Petri Nets", International Journal of Advanced Manufacturing Technology, UK, Vol.27, No.1-2, Jan 2006, pp 190-204.
  70. Fung, R.Y.K., Chen, Y., Chen, L. and Tang, J.F., "A fuzzy expected value-based goal programming model for product planning using quality function deployment", Engineering Optimization, UK, Vol.37, No.6, Sep 2005, pp 633-647.
  71. Fung, R.Y.K. and Chen, T., "A Multi-Agent Supply Chain Planning and Coordination Architecture", International Journal of Advanced Manufacturing Technology, UK, Vol.25, No.1, Jun 2005, pp 811-819.
  72. Lau, H.C.W., Lau, P.K.H., Fung, R.Y.K., Chan, F.T.S. and Ip, R.W.L., "A Virtual Case Benchmarking Scheme for Vendors Performance Assessment", Benchmarking: An International Journal, UK, Vol.12, No.1, Jul 2005, pp 61-80.
  73. Chen, Y., Fung, R.Y.K. and Tang, J.F., "Fuzzy expected value modeling approach for determining target values of engineering characteristics in QFD", International Journal of Production Research, UK, Vol.43, No.17, Aug 2005, pp 3583-3604.
  74. Liu, H., Fung, R.Y.K. and Jiang, Z.B., "Modelling of Semiconductor Wafer Fabrication Systems by Extended Object-Oriented Petri Nets", International Journal of Production Research, UK, Vol.43, No.3, Aug 2005, pp 471-495.
  75. Wan, F., Wang, D. and Fung, R.Y.K., "New Product Introduction Planning using a 0-1 Semi-Infinite Programming Model", Production Planning and Control, UK, Vol.16, No.1, May 2005, pp 12-20.
  76. Wong, G.Y.F. and Fung, R.Y.K., "Technological Innovativeness and Organizational Culture in Hong Kong", Contemporary Management Research, Taiwan, Vol.1, No.1, Jul 2005, pp 35-56.
  77. Fung, R.Y.K., Chong, S.P.Y. and Wang Y., "A Framework of Product Styling Platform Approach: Styling as Intangible Modules", Concurrent Engineering: Research and Applications, UK, Vol.12, No.2, May 2004, pp 89-103.
  78. Wang, W., Fung, R.Y.K. and Chai, Y., "An Approach of JIT Distribution Requirements Planning for Supply Chain", International Journal of Production Economics, UK, Vol.91, No.2, Jul 2004, pp 101-107.
  79. Lau, H.C.W., Chan, F.T.S., Fung, R.Y.K. and Wong C., "An XML-Based Real Time Quality Measurement Scheme", Industrial Management & Data Systems, UK, Vol.104, No.6, Jun 2004, pp 505-512.
  80. Lee, C., Lau, H.C.W., Yu, K.M. and Fung, R.Y.K., “Development of a Dynamic Data Interchange Scheme to Support Product Design in Agile Manufacturing”, International Journal of Production Economics, UK, Vol.87, Apr 2004, pp 295-308.
  81. Chen, Y., Tang, J.F., Fung, R.Y.K. and Ren, Z., “Fuzzy Regression-Based Mathematical Programming Model for Quality Function Deployment”, International Journal of Production Research, UK, Vol.42, No.5, Mar 2004, pp 1009-1027.
  82. Lau, H.C.W., Choy, K.L., Wong, C. and Fung, R.Y.K., "A Generic Management Information System for Small and Medium Enterprises", International Journal of Manufacturing Technology and Management, UK, Vol.5, No.1/2, Aug 2003, pp 162-176.
  83. Jiang, Z.B. and Fung, R.Y.K., "An Adaptive Agile Manufacturing Control Infrastructure based on TOPNs-CS Modelling", International Journal of Advanced Manufacturing Technology, UK, Vol.22, No.3-4, Jul 2003, pp 191-215.
  84. Jiang Z.B., Fung R.Y.K., Zuo M J and TU P.Y.L., "Automatic Modelling of One-of-a-Kind Production Systems by TOPNs-CS", International Journal of Advanced Manufacturing Technology, UK, Vol.21, No.1, Jan 2003, pp 45-65.
  85. Tu, Y. L., Fung, R.Y.K., Tang J and Kam, J.J., "Computer Aided Customer Interface for Rapid Product Development", International Journal of Advanced Manufacturing Technology, UK, Vol.21, No.10-11, Oct 2003, pp 743-753.
  86. Fung, R.Y.K., Tang, J.F., Tu, P.Y. and Chen, Y., "Modelling of Quality Function Deployment Planning with Resource Allocation", Research in Engineering Design, USA, Vol.14, Sep 2003, pp 247-255.
  87. Fung, R.Y.K., Tang, J.F. and Wang D., "Multi-Product Aggregate Production Planning with Fuzzy Demands and Fuzzy Capacities", IEEE Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans, USA, Vol.33, No.3, Aug 2003, pp 302-313.
  88. Fung R.Y.K., Au A Y M and IP A W H, "Petri Net-based Workflow Management Systems for In-Process Control in a Plastic Processing Plant", Journal of Materials Processing Technology, UK, Vol.139, Mar 2003, pp 302-309.
  89. Xie, S.Q., Tu Y.L., Fung R.Y.K. and Zhou Z.D., "Rapid one-of-a-kind product development via the Internet: a literature review of the state-of-the-art and a proposed platform", International Journal of Production Research, UK, Vol.41, No.18, Nov 2003, pp 4257-4298.
  90. Fung R.Y.K., Au, Y.M., Jiang, Z.B. and Lau, H.C.W., "Supply Chain Workflow Modelling using Modular Petri Nets", International Journal of Advanced Manufacturing Technology, U.K., Vol.22, No.7-8, Jun 2003, pp 587-601.
  91. Tang J F, Fung R.Y.K., Xu B and Wang D, "A New Approach to Quality Function Deployment Planning with Financial Consideration", Computers and Operations Research, UK, Vol.29, Sep 2002, pp 1447-1463.
  92. Fung R.Y.K., Jiang Z.B., Zuo M J and Tu P.Y.L., "Adaptive Production Scheduling of Virtual Production Systems Based on Object-Oriented Petri Nets with Changeable Structure Modeling", International Journal of Production Research, UK, Vol.40, No.8, Sep 2002, pp 1759-1785.
  93. Fung R.Y.K., Tang J and Wang D, "Extension of a Hybrid Genetic Algorithm for Nonlinear Programming Problems with Equality and Inequality Constraints", Computers and Operations Research, UK, Vol.29, No.3, Aug 2002, pp 261-274.
  94. Fung R.Y.K., Tang J F, Tu Y L and Wang D, "Product Design Resources Optimisation Using a Non-Linear Fuzzy Quality Function Deployment Model", International Journal of Production Research, UK, Vol.40, No.3, Jul 2002, pp 585-599.
  95. Fung R.Y.K., Tam W T, Ip A W H and Lau H C W, "Software process improvement strategy for enterprise information systems development", International Journal of Information Technology and Management, UK, Vol.1, No.2/3, Jul 2002, pp 225-241.
  96. Fung R.Y.K., Ma X and Lau H C W, "(T,S) Policy for co-ordinated inventory replenishment systems under compound poisson demands", Production Planning and Control, UK, Vol.12, No.6, Sep 2001, pp 575-583.
  97. Fung R.Y.K. and Ma X, "A new method for the joint replenishment problems in manufacturing", Journal of the Operational Research Society, UK, Vol.52, Aug 2001, pp 358-362.
  98. Harding J A, Popplewell K, Fung R.Y.K. and Omar A R, "An intelligent information framework for market driven product design", Computers in Industry, UK, Vol.44, No.1, Jul 2001, pp 49-63.
  99. Jiang Z, Zuo M J, Fung R.Y.K. and Tu P.Y.L., "Colored Petri Nets with Changeable Structures (CPN-CS) and their Applications in Modeling One-of-a-Kind Production (OKP) Systems", Computer & Industrial Engineering, USA, Elsevier Science, Vol.41, No.3, Dec 2001, pp 279-308.
  100. Tang J F, Wang D and Fung R.Y.K., "Formulation for General Possibilistic Linear Programming Problems for Complex Industrial Systems", Fuzzy Sets and Systems, UK, Vol. 119, No.1, Sep 2001, pp 41-48.
  101. Djordjevich A, Fung M and Fung R.Y.K., "Principles of Deflection-Curvature Measurement", Measurement Science and Technology, USA, Vol.12, Nov 2001, pp 1983-1989.
  102. Ma X, Fung R.Y.K. and Xu C, "Stable Factorized Quasi-Newton Methods for Nonlinear Least Squares Problems", Journal of Computational and Applied Mathematics, UK, Vol.129, No.1-2, Jul 2001, pp 1-14.
  103. Wang D, Tang Z, Ip A and Fung R.Y.K., "A Human-Computer Interactive Approach-Based on Activity-Section Analysis for BPR", Production Planning and Control, UK, Vol. 11, No.8, Dec 2000, pp 289-296.
  104. Ip W H, Kwong C K and Fung R.Y.K., "Design of Maintenance System in MRPII", Journal of Quality in Maintenance Engineering, Vol.6, No.3, 2000, pp 177-191.
  105. Tang J F, Wang D and Fung R.Y.K., "Fuzzy Formulation for Multi-Product Aggregate Production Planning", Production Planning and Control, UK, Vol.11, No.7, Oct 2000, pp 670-676.
  106. Fung R.Y.K., Pereira A C and Yeung R W H, "Performance evaluation of a Web-based information system for laboratories and service centres", International Journal of Logistics Information Management, Vol.13, No.4, 2000, pp 218-227.
  107. Jiang Z.B., Zuo M J, Fung R.Y.K. and Tu P.Y.L., "Performance modeling of complex dynamic production systems using Temporized Object-Oriented Petri Nets with Changeable Structure (TOPNs-CS)", International Journal of Advanced Manufacturing Technology, Vol.16, No.7, 2000, pp 521-536.
  108. Jiang Z.B., Zuo M J, Fung R.Y.K. and Tu P.Y.L., "Temporized Colored Petri Nets with Changeable Structure (CPN-CS) for performance modeling of dynamic production systems", International Journal of Production Research, UK, Vol.38, No.8, May 2000, pp 1917-1945.
  109. Fung R.Y.K., Law, D.S.T., and Ip, W.H., "Design Targets Determination for Inter-Dependent Product Attributes in QFD using Fuzzy Inference", International Journal of Integrated Manufacturing Systems, Vol. 10, No. 6, 1999, pp. 376-383.
  110. Tu, P.Y.L. and Fung R.Y.K., "Scheduling Preventive Maintenance Activities through a Computerised Decision Support System", International Journal of Condition Monitoring and Diagnostic Engineering Management, Vol. 2 , No. 3, 1999, pp. 19-23.
  111. Jiang, Z.B., Zuo, M.J., Tu, Y.L. and Fung R.Y.K., "Object-Oriented Petri Nets with Changeable Structure (OPNs-CS) for Production System Modelling", International Journal of Advanced Manufacturing Technology, Vol. 15, Issue 6, 1999, pp. 445-459.
  112. Ip, W.H., Fung R.Y.K. and Keung, K.W., "An Investigation of Stochastic Analysis in FMS Simulation", International Journal of Advanced Manufacturing Technology, Vol. 15, 1999, pp. 244-250.
  113. Tang, J.F., Wang, D., Ip, A. and Fung R.Y.K., "A Hybrid Genetic Algorithm for a Type of Non-linear Programming Problem", Computers and Mathematics with Applications, Vol. 36, Issue 5, 1998, pp. 11-21.
  114. Fung R.Y.K., Popplewell, K. and Xie, J., "An Intelligent Hybrid System for Customer Requirements Analysis and Product Attribute Targets Determination", International Journal of Production Research, Vol. 36, No.1, 1998, pp. 13-34.
  115. Tang, J.F., Wang, D. and Fung R.Y.K., "Model and Method based on GA for Non-Linear Programming Problems with Fuzzy Objectives and Resources", International Journal of Systems Science, Vol. 29, No. 8, 1998, pp. 907-913.
  116. Bode, J. and Fung R.Y.K., "Cost Engineering with Quality Function Deployment", Computers and Industrial Engineering, Vol. 35, Issue 3-4, 1998, pp. 587-590.
  117. Fung R.Y.K., Ren, S., Bode, J. and Luo, S., "A Framework of Decision Support Systems in the Advanced Manufacturing Enterprises -- A systems view", International Journal of Integrated Manufacturing Systems, Vol. 8, No. 6, 1997, pp. 365-373.
  118. Tang, J.F., Wang D. and Fung R.Y.K., "Model and Method based on GA for Non-Linear Programming Problems with Fuzzy Resources in Manufacturing Systems", International Journal of Manufacturing System Design, Vol. 2, No. 4, 1995, pp. 355-362.

Book Chapters

  1. Ng, P. and Fung, R.Y.K., "Application of formal concept analysis in model-based testing", Advances in Software Engineering, Springer Berlin Heidelberg, Kim, T.H., Fang, W.C., Lee, C.H., and Arnett, K.P. (eds.), CCIS, November 2009, Vol. 30, pp.110-123.
  2. Fung, R.Y.K., "A Framework of Product Styling Platform Using Case-based Styling Indexing", Advances in Design, Springer Series in Advanced Manufacturing, ElMaraghy, Hoda A.; ElMaraghy, Waguih H. (Eds.), 2006, XXII, ISBN: 978-1-84628-004-7, Chapter 17, pp. 209-218.
  3. Chen, T., Long, L. and Fung, R.Y.K., "A Genetic Algorithm for Batch Scheduling with Sequence-Dependent Setup Times", Springer Series in Control and Information Sciences, Springer Berlin / Heidelberg, ISSN:0170-8643, Vol. 345, 2006, pp. 1137-1144.

Last modified on 12 December, 2018