paper Publications
  1. Early Detection of Interconnect Degradation by Continuous Monitoring of RF Impedance, Daeil Kwon, Michael H. Azarian and Michael Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 9, No.2, June 2009.

  2. Design of a Hinge Kit System in a Kimchi Refrigerator Receiving Repetitive Stresses, Seong-woo Woo, Dennis L. O’Neal, Michael Pecht, Engineering Failure Analysis 16 (2009) 1655-1665.

  3. A Framework of Cost-effective and Accurate Maintenance Combining CBM RCM and Data Fusion, Gang Niu, Michael Pecht, Proceeding of ICRMS 2009, July 21-25, 2009.

  4. Health Assessment and Prognostics of Electronic Products – An Alternative Method of Product Life Cycle Cost Improvement, Jie Gu, Daniel Lau, Michael Pecht, Proceeding of ICRMS 2009, July 21-25, 2009.

  5. Physics-of-failure-based Prognostics for Electronic Products, Michael Pecht and Jie Gu, Transactions of the Institute of Measurement and Control 31, 3/4 (2009), pp. 309-322.

  6. Precursor Parameter Identification for Power Supply Prognostics and Health Management, Huiguo Zhang, Rui Kang, Michael Pecht, Proceedings of ICRMS 2009, July 20-24, 2009.

  7. Reliability Assessment of Immersion Silver Finished Circuit Board Assemblies Using clay Tests, Yilin Zhou, Michael Pecht, Proceedings of ICRMS 2009, July 20-24, 2009.

  8. A Method of Reliability Assessment on Creep corrosion for Immersion Silver Finished PCBs, Shunong Zhang, Rui Kang, Anshul Shrivastava, Michael Osterman, Michael Pecht, Proceedings of ICRMS 2009, July 20-24, 2009.

  9. Design Evaluation of a French Refrigerator Drawer System Subjected to Repeated Food Storage Loads, Seong-woo Woo, Dangsu Ryu, Michael Pecht, Engineering Failure Analysis 16 (2009) 2224-2234.

  10. Identification of Interconnect Failure Mechanisms Using RF Impedance Analysis, Daeil Kwon, Michael H. Azarian, and Michael Pecht, IEEE Signal Propagation on Interconnects, Strasbourg, France, May 2009.

  11. Model-based and Data-driven Prognosis of Automotive and Electronic Systems, Shunfeng Cheng, Michael Pecht, 5th Annual IEEE Conference on Automation Science and Engineering, pp96-101, Bangalore, India, August 22-25, 2009.

  12. A Fusion Prognostics Method for Remaining Useful Life Prediction of Electronic Products, Chaitanya Sankavaram, Bharath Pattipati, Anuradha Kodali, Krishna Pattipati, Mohammad Azam, Sachin Kumar, and Michael Pecht, 5th Annual IEEE Conference on Automation Science and Engineering, pp96-101, Bangalore, India, August 22-25, 2009.

  13. Warpage Analysis of Flip-Chip PBGA Packages Subject to Thermal Loading, Ming-Yi Tsai, Hsing-Yu Chang, Michael Pecht, IEEE Transactions on Device and Materials Reliability, 1530-4388, 2009.

  14. Comparative Assessment of Electrochemical Migration on PCBs with Lead-Free and Tin-Lead Solders, Xiaofei He, Michael H Azarian, Michael G. Pecht, EMS007 Proceeding, Aug 2009.

  15. Baseline Performance of Notebook Computers Under Various Environmental and Usage Conditions for Prognostics, Sachin Kumar, Michael Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 32, No. 3, September 2009.

  16. Solder Ball Attachment Assessment of Reballed Plastic Ball Grid Array Packages, Lei Nie, Michael Osterman, Michael Pecht, Fubin Song, Jeffery Lo and S. W. Ricky Lee, IEEE Transactions on Components and Packaging Technology, Vol. 32, No. 3, September 2009.

  17. Interfacial Reaction of Reballed BGAs under Isothermal Aging Conditions, Lei Nie, Mingzhi Dong, Jian Cai, Michael Osterman and Michael Pecht, Proceeding of ICEPT-HDP, August 10-13, 2009, Beijing, China, pp 633-641.

  18. The influence of SO 2 Environments on Immersion Silver Finished PCBs by Mixed Flow Gas Testing, Shunong Zhang, Anshul Shrivastava, Michael Osterman, Michael Pecht & Rui Kang, Proceeding of ICEPT-HDP, August 10-13, 2009, Beijing, China, pp116-122.

  19. Overview of China’s Medical Device Market and Government Regulatory Agencies, Yan Liu, Michael Pecht, Materials and Processes for Medical Devices 2009, Minneapolis, Minnesota, August 10-12, 2009.

  20. Modeling planned maintenance with non-homogeneous defect arrivals and variable probability of defect identification, W. Wang, Maintenance and Reliability, 2(46), 73-77, 2010.

  21. Maintenance models based on the np control charts with respect to the sampling interval, W. Wang, J. Opl. Res Soc, doi:10.1057/jors.2009.165, 2009.

  22. Model for maintenance service contract design, negotiation and optimisation, W. Wang, European J. Operational Research, DOI: 10.1016/j.ejor.2009.02.018, 2009.

  23. Modelling industrial maintenance and reliability, W. Wang, , IMA Journal of Management Mathematics, Press, 2009.

  24. An inspection model for a process with two types of inspections and repairs, W. Wang, Reliability Engineering and System Safety,94, 526-533, 2009.

  25. Modelling condition based maintenance failure modes using stochastic filtering theory, Carr, M. J. and Wang, W., IEEE Transactions in Reliability, 2009.

  26. Plant residual time modelling based observed variables in oil samples, W. Wang and B. Hussin, J. Opl. Res Soc, 60, 789-796, 2009.

  27. Early Defect Identification: application of Statistical Process Control methods, W. Wang and W. Zhang, J. Quality & Main. Eng, 14,3, 225-236, 2008.

  28. An asset residual life prediction model based on expert judgments, W. Wang and W. Zhang, European Journal of OR. 188, 496-505, 2008.

  29. The effect of the impedance of a thin hydrogel electrode on sensation during functional electrical stimulation, Sha N, Kenney LPJ, Heller BH, Barker AT, Howard D, and Wang W, Medical Engineering and Physics, 30, 739-746, 2008.

  30. A case comparison of a proportional hazards model and a stochastic filter for condition-based maintenance applications using oil-based condition monitoring information, M. Carr, and W. Wang, Proceedings of the Institution of Mechanical Engineers, Part O, Journal of Risk and Reliability, vol 222, 47-55, 2008.

  31. Problem identification in the frame of maintenance modelling: a case study, A. Akbarov, W. Wang and A.H. Christer, I. J. Prod. Res. 46, 4 1031-1046, 2008.

  32. Analysis of supply chain contracts from a supplier’s perspective, W. Wang, H. Wang and K.A.H. Kobbacy, IMA Journal of Management Mathematics, 19, 1, 17-38, 2008.

  33. A two-stage prognosis model in condition based maintenance, W. Wang, Euro. J OR, 182, 1177-1187, 2007.

  34. Comment: “expert elicitation for reliability system design”, W. Wang, Statistical Sciences v21, 4, 456-459, 2007.

  35. Condition based maintenance theory and practice, Y. Wang, W. Wang, S. Fang and W Lu, Plant Management and Maintenance, 7, 7-9, 2007.

  36. Two-stage prediction model research on condition-based maintenance, Y. Wang, W. Wang, S. Fang and W Lu, Journal of Harbin Engineering University, 28, 1278-1281, 2007.

  37. A prognosis model for wear prediction based on oil based monitoring, W. Wang, J. Opl. Res Soc, Vol 58 7 887-893, 2007.

  38. A study on Trauma care system performance evaluation, W. Wang, D. Bernice and O. Bouramra, J. Trauma, 62,5 1215-1222, 2007.

  39. A Bayesian approach in delay time maintenance model parameters estimation using both subjective and objective data, W. Wang and X. Jia, Quality and reliability Engineering Int., 23, 95-105, 2007.

  40. Analysis and design of returns policies from a supplier’s perspective, H. Wang, W. Wang and AKH Kabbacy, J. Opl. Res Soc, 58, 391-401, 2007.

  41. A comparison study of the injury score models, D. Bernice W.Wang and O. Bouramra, E. J. Trauma, 32, 538-547, 2007.

  42. Modelling the probability assessment of the system state using available condition information, W. Wang, IMA. J. Management Mathematics, 17(3),225-234, 2006.

  43. A model to predict the residual life of aircraft engines based on oil analysis data, W. Wang and W. Zhang, Naval Logistic Research, 52, 276-284, 2005.

  44. A delay time based approach for risk analysis of maintenance activities, W. Wang, The Journal of the Safety and Reliability Society, 23, 1, 103-113, 2003.

  45. Solution algorithms for a multi-component system inspection model, W. Wang and A.H. Christer, Computers and OR, 30, 190-34 , 2003.

1 | 2 | 3 | 4 | Next Page

go back