| Call Number | Thesis |
|---|---|
|
AM125 .T34 2001 |
Tai, Chuk-shing. Electronic tour guide for the Hong Kong Science Museum : device feasibility [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. viii, 9-87 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
HD30.2 .C49 2004 |
Chung, Man Chung. Knowledge based functional modeling and value stream improvement for a motor manufacturing company 2004. v, 216 leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2004. |
|
HD30.2 .L467 2005 |
Leung, Joseph Hing Pong. Adoption of enterprise integration modeling in the design and implementation of knowledge management system for the Hong Kong Science and Technology Parks Corporation = 利用企業整合模型在香港科技園設計和實施知識管理系統 2005. ix, 314 leaves : ill. 30 cm. Thesis (Eng.D.)--City University of Hong Kong, 2005. |
|
HD30.2 .L63 2008 |
Lo, Kwong Chi. Development of user-satisfaction-based knowledge management performance measurement system = 建立以使用者滿意為本的知識管理績效評核系統 2008. xvi, 244 leaves : ill. (some col.) 30 cm. Thesis (Eng.D.)--City University of Hong Kong, 2008. |
|
HD30.2 .T36 2009 |
Tang, Wah Hau. Knowledge management solution for railway construction = 應用於鐵路建造的知識管理方案 2009. xvii, 224, 17, [26] leaves : ill. 30 cm. Thesis (Eng.D.)--City University of Hong Kong, 2009. |
|
HD30.2 .W66 2003 |
Wong, Maverick Teng. An integrated knowledge management model for organizational development 2003. viii, 80 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2003. |
|
HD30.2 .Y48 2004 |
Yeung, Shuk Yee. Study and comparison of two knowledge representative models in modeling typical manufacturing processes 2004. 117 leaves : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2004. |
|
HD30.2122 .T56 1997 |
Tin, Wai Ling. A proposed dynamic meeting management (DMM) with total productivity and quality management (TPQM) Hong Kong : City University of Hong Kong, 1997. xiii, 106 p. 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
HD30.213 .C43 1999 |
Ching, Lawrence Tin-wah. Decision support system for new project selection in VTech Communications Ltd = 偉易達之選擇項目決策支援系統 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. xi, 101 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
HD30.28 .C454 1997 |
Chiang, King Wah. Competitive strategy for Projects & Planning Sub-Division, Electronics division of EMSD under commercialisation Hong Kong : City University of Hong Kong, 1997. xii, 95 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
HD30.28 .C85 2004 |
Cui, Hong. Theory and tools of linking business and manufacturing strategies = 聯系經營戰略與製造戰略之理論及實用工具研究 2004. xix, 231 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2004. |
|
HD30.28 .F65 1997 |
Fok, David Kam-cheong. Business strategy for Enviropace Limited in mainland China Hong Kong : City University of Hong Kong, 1997. [xi], 75 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
HD30.335 .C44 1998 |
Cheong, Matthew Veng Va. To design and implement communication scheme for a property investment & development company Hong Kong : City University of Hong Kong, 1998. 200 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong. |
|
HD31 .C4565 2007 |
Chan, Leung. Development of critical success factors and assessment system for coopetition management = 競合管理的成功要素及評核系統之研發 2007. viii, 155 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2007. |
|
HD31 .C458 1998 |
Cheung, Lap-yee. Investigation of manufacturing strategy based on stock business concept Hong Kong : City University of Hong Kong, 1998. 59, [4] leaves : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 1998. |
|
HD31 .S599 1999 |
So, Hon-choi. Development of an integrated management system in an engineering organisation = 綜合管理系統在工程部門之發展 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. ix, 118, [28] leaves. : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
HD38.5 .C384 2002 |
Chan, Fung Yee Integration of internal supply chain process under an ERP environment [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2002. vi, 103 leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2002. |
|
HD38.5 .L45 2007 |
Leung, Pui Fun. Supply chain management in Hong Kong/Pearl River Delta (PRD) manufacturing industry = 香港及珠江三角洲製造業之供應鏈管理 2007. 1 v. (various pagings) : ill. (some col.) 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2007. |
|
HD38.5 .M35 2002 |
Mak, Wan Hoi. The future role of a trading company in supply chain management in new era = 在新世紀供應鏈管理中貿易公司的未來角色 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2002. 123 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
HD38.5 .N49 2001 |
Ngan, Chi Ho. Development of supplier selection framework for the practice of supply chain management = 為實踐供應鏈管理而發展之供應商選擇體制 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. ii, 66, [3] leaves : ill. 30 cm. + 1 CD-ROM (4 3/4 in.) Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
HD38.5 .T37 2009 |
Tang, Yuen Ting. Development of competitive pricing game for logistics service = 物流服務的競爭價格的博弈之研究 2009. x, 106 leaves : col. ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2009. |
|
HD38.5 .W66 2001 |
Wong, Fung Yee, M. Phil. A supplier environmental performance evaluation model : an integral part of contemporary supply chain management = 供應商環保表現的評估模型 : 當代供應鏈管理的合成部份 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. xi, 154 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2001. |
|
HD38.5 .W95 2005 |
Wu, Xinyu. Supply chain coordination with vendor-managed inventory (VMI) arrangements = 供應商管理庫存合同下的供應鏈協調 2005. v, 112 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2005. |
|
HD39.5 .A28 2005e |
Abulizi, Anniwa. Information system model development for the purchasing function in buyer supplier environment 2005. Thesis (M.Sc.)--City University of Hong Kong, 2005. |
|
HD39.5 .T75 2000 |
Tsang, Chun-hung. Design of procurement information system = 採購資訊系統之設計 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. viii, 67, 18 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong. |
|
HD40 .L84 2000 |
Luk, Ho-yin. The development of a fuzzy logic decision making system for inventory re-ordering quantity model in a trading company = 發展模糊邏輯決定作出系統於貿易公司之物料重新定購量模型 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. ix, 116, ii, 15 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong. |
|
HD41 .W36 2000 |
Wan, Trevor Ho-kuen. Competitive strategy for an OEM toy company in Hong Kong = 某香港委託製造玩具公司之競爭策略 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. viii, 82 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong. |
|
HD42 .L348 2005 |
Lam, Ping Kit. Conflict management in client-supplier collaborative new product development = 客戶與供應商協作式新產品開發之衝突管理 2005. ix, 178 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2005. |
|
HD42 .L35 2002 |
Lam, Polly Po Yee. Conflict studies in the implementation of account management system in toys laboratory of SGS = 香港通用公証行玩具部之賬號管理系統成立時的衝突研究 2002. x, 78 leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
HD42 .L48 1998 |
Leung, Kenneth Ki-wah. Conflict management in Vtech Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1998. x, 76 leaves : ill. (some col.) 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998 |
|
HD45 .W66 2007 |
Wong, Yiu Fai Gary. Assessment approaches of managing organizational culture in technological innovation in Hong Kong = 香港企業技術創新組織文化管理評估 2007. xi, 293 leaves : ill. 30 cm. Thesis (Eng.D.)--City University of Hong Kong, 2007. |
|
HD50.5 .M34 1999 |
Mak, Kwok-hong. The effects of empowerment and performance-based reward on personal initiative and employee commitment = 強化及表現性獎勵對僱員主動性及承諾之作用 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. ix, 64 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
HD53 .L586 2009 |
Liu, Tak Wing. An audit model for intellectual property management excellence = 知識產權管理卓越之評審模型 2009. xx, 434 leaves : ill. 30 cm. Thesis (Eng.D.)--City University of Hong Kong, 2009. |
|
HD56.25 .Y48 1995 |
Yeung, Tat-man. Developing a shop floor performance measurement system [Hong Kong] : Dept. of Manufacturing Engineering, City University of Hong Kong, 1995. vii, 107 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995. |
|
HD57.7 L345 2005 |
Lam, Joyce Yung Wei. A case study on the relationship between leadership style and learning motivation = 領導方式與學習動力的相互關係之個案分析 2005. xv, 182 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2005. |
|
HD58.5 .L56 1998 |
Lin, Kwok-ying. Review of the project management structure of CLP Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1998. viii, 76 leaves : ill. 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
HD58.7 .H625 1998 |
Ho, Andrew Shiu-kei. Developing a framework for effective company culture implementation Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1998. viii, 78 leaves : ill. 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
HD58.82 .L28 2006 |
Lam, Man Yu. An organizational learning model for Hong Kong vocational education in the context of TQM culture = 在全面質量管理文化下香港職業教育之組織學習模式 2006. iv, x, 227 leaves : ill. 30 cm. Thesis (Eng.D.)--City University of Hong Kong, 2006. |
|
HD58.82 .L373 2007 |
Law, Kris Mo-yin. The development and implementation of Project Action Learning framework (PAL) : from theory to practice = 項目參與組織型學習 (PAL) 方法的理論研發與實踐 2007. xxiv, 356, 68 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2007. |
|
HD58.82 .L4596 2009 |
Lee, Yiu Man. A sociotechnical system approach for enhancing the dynamic capabilities of an organisation : a participatory action research in the manufacturing industry in mainland China = 以社會技術系統提高組織動態能力 : 在中國製造業界的參與性行動研究 2009. vii, 55 leaves : ill. (some col.) 30 cm. Thesis (Eng.D.)--City University of Hong Kong, 2009. |
|
HD58.87 .L425 2000 |
Lee, Kwong-tat. A study of an integrated methodology for business process improvement = 企業改善整合方法之硏究 Hong Kong : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2000. xii, 160 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2000. |
|
HD58.87 .L48 1997 |
Leung, Stephen Kin Sun. Improving the direct local purchase process in the EMSD Hong Kong : City University of Hong Kong, 1997. ix, 51 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
HD58.9 .C435 1996 |
Chan, Kenneth Kwai-sun. Development of a methodology for assessing average individuals' behavior and organizational effectiveness in a small engineering department = 制定如何評估小型工程部門的組織成效及平均員工行為和表現 1996. ii, 119 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
HD58.9 .T36 1997 |
Tang, How-kong. The effect of leadership behaviour on organizational outcomes in a dual command situation Hong Kong : City University of Hong Kong, 1997. 80, [38] leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1997. |
|
HD61 .C44 1998 |
Chim, Yuk-ming. Development of knowledge-based risk management system for Hong Kong construction projects = 香港建築工程風險管理知識庫的設計 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1998. viii, 88, 12 leaves. : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
HD61 .L63 1995 |
Lo, Chi-kin, Albert. Risk management for improving electricity supply reliability Hong Kong : City University of Hong Kong, Department of Manufacturing Engineering, 1995. xi, 108 p : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995. |
|
HD61 .L86 2002 |
Lun, Yuet Por. Project risk management in automatic train control (ATC) interface project for platform screen door (PSD) 2002. xi, 72, [34] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
HD61 .S55 2001 |
Shiu, Francis Chi Hung. Application of risk management on establishing a new business line : smart-handheld LCD display module in Philips Mobile Display System HK Ltd. = 飛利浦流動系統香港有限公司 : 電子手帳液晶顯示器 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. 110, [25] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
HD62.15 .C45 2001 |
Chan, Kar Man. Examination of total quality management implementation factors in Hong Kong = 在香港實踐全面質量管理因素之硏究 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. x, 131 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2001. |
|
HD62.15 .L35 2000 |
Lam, Tung-nam. A study of the integration of total quality management (TQM) and employee involvement (EI) in Hong Kong manufacturing enterprise = 香港製造企業完全優質管理及員工參與整合硏究 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. x, 233 leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
HD62.15 .L423 1998 |
Lee, Che-kit. Developing a TQM implementation framework for EMSD Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1998. 1 v. (various pagings) : ill. 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
HD62.15 .L465 2002 |
Leung, Kin Tsui Evaluate the relationship among TQM, ISO 9000 certification and business performance improvement : a survey study in Hong Kong/China companies [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2002. 125 leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2002. |
|
HD62.15 .Y48 2004 |
Yeung, I Ki. Self-assessment system for supplier quality management (SQM) = 供應商品質管理的自我評核系統 2004. vi, 126, [36] leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2004. |
|
HD62.15 .Y56 2002 |
Ying, Lee Wai. Feasibility study of market orientation in Health Sector Division of Electrical and Mechanical Services Trading Fund = 機電署營運基金衛生組市場導向研究 2002. xi, 70 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
HD62.17 .C45 2006e |
Chan, Ka Tat. Investigation of a company internal workflow for improvement = 公司內部流程之研究與改善 2006. Thesis (M.Sc.)--City University of Hong Kong, 2006. |
|
HD62.47 .C34 2000 |
Chang, Chi-shing. Joint venture strategies for building services projects in China = 在中國屋宇設備建造工程的合營企業策略 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2000. 52 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
HD62.47 .T37 2002 |
Tang, Kenneth Siu Ming. Development of project management system for joint venture manufacturing project = 聯營製造項目管理系統之開發 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2002. x, 89 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
HD62.5 .N48 1996 |
Wu, Shao-k'ang Setting up a business to sell high-tech products into China Hong Kong : City University of Hong Kong, 1996. vii, 89 leaves : ill. 30 cm. Thesis (M.Sc.)--City university of Hong Kong, 1996. |
|
HD62.5 .W66 2005 |
Wong, Wing Ki. Entrepreneurial factors affecting incubatee performance : a Hong Kong-based study = 影響香港孵化公司表現的企業性因素 2005. xiv, 160 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2005. |
|
HD69.C6 P36 2000 |
Pang, Victor Yiu-hung. Development of a modern management consulting model in CUBank's Group Consulting Services Department = 於 CU 銀行集團顧問服務部內發展一個現代管理顧問模式 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2000. vii, 61 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
HD69.C6 T86 2000 |
Tung, Hiu-ching. A customer satisfaction study in management consulting service = 管理顧問服務的顧客滿意硏究 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. vii, 91, [7] leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
HD69.P75 C43 1999 |
Chan, Hon-wing. Adopting the ISO 9001 quality standards to improve the project quality = 應用 ISO 9001 品質標準於方案品質管理 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. x, 81 leaves. : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
HD69.P75 C44 2000 |
Chan, Wai-kwong. The development of information model for project management = 建立一個項目管理的資料模型 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. xi, 117, [12] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong. |
|
HD69.P75 C447 2000 |
Chau, Shuk-yin. Positive conflict management in Hong Kong project teams = 香港項目組的正面矛盾與衝突管理 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. xi, 114 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2000. |
|
HD69.P75 C45 1999 |
Cheung, Ching Ching. Managing conflict in cross-functional project teams in Hong Kong = 多功能項目組所面對的矛盾與衝突之管理 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. vii, 124 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1999. |
|
HD69.P75 H67 2000 |
Hong, Daniel Wing-keung. To improve the project management system and practices in BDCI, a power tool manufacturing company = 改善電動工具製造公司之項目管理系統與常規 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management City University of Hong Kong, 2000. iv, 56, [15] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
HD69.P75 K556 2001 |
Khoo, Steven Lin Wai. Improving the project management effectiveness at Infocast Ltd. = 改善匯港資訊有限公司項目管理的有效性 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. 104 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
HD69.P75 T78 1999 |
Tsui, Jeffery Chung-man. The project risk management for BOT Projects in East Asia developing countries = 東亞發展地區的建造, 經營及移交工程的風險管理 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. xi, 104, [37] leaves. : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
HD75.6 .C474 1996 |
Chiu, Wing-wah. Benefits and costs analysis in implementation of ISO 14000 environmental management system in Hong Kong manufacturing industry Hong Kong : City University of Hong Kong, 1996. v, 82, [54] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
HD2346.H6 H43 2003 |
Ho, Karis Ka Yan. The development and implementation of a comprehensive self-assessment framework to enhance quality performance in a Hong Kong SME = 建立及實踐自我品質評審基制以提高香港中小型企業品質表現 2003. ix, 187 leaves : ill. (some col.) 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2003. |
|
HD2365 .N425 2002 |
Ng, Alex Man Kwong. Application of AHP in tender assessment for MTRCL E&M contracts in extension project = 分析階級組織程序於地鐵公司支線發展項目的機電工程合約審批之應用 2002. ix, 51, [5] leaves : ill., maps 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
HD2746.5 .Z45 2010 |
Zhong, Guixian. Designing efficient mechanisms for mergers & acquisitions and studying impacts of such events on stock prices = 為企業並購設計有效機制並研究此類事件對公司股價的影響 2010. xi, 94 leaves 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2010. |
|
HD2768.H6 N43 1993 |
Ngan, Kwan-leung. Service quality in utility companies [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1993. 121, [101] leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
HD2768.H64 H63 1999 |
Ho, Raymond Wai-ming. Developing a safety management system in Government Flying Service = 為政府飛行服務隊發展一套安全管理系統 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. 87 leaves. : ill. (come col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
HD5112 .L525 2003 |
Lee, Chung Leung. Effect of rest breaks for productivity improvement in a lithium-ion battery manufacturing company = 應用有效的休息在鋰離子電池生産線上能提升生産力 2003. iv, 122, [10] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2003. |
|
HD7262.5.H6 Y8 2005 |
Yu, Yanny Hoi Kuen. Development of accident costs estimation model for Hong Kong catering industry = 香港飲食業意外成本預算模型之建立 2005. xi, 172 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2005. |
|
HD9057 .L43 1995 |
Lee, Ka-chung, Randy. Design and implementation of trays handling information system model for bakery industry based on CIM concept [Hong Kong] : Dept. of Manufacturing Engineering, City University of Hong Kong, 1995. viii, 87, [40] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995 |
|
HD9348.A2 C45 2001 |
Choi, Fuk Sing. Energy management system for beverage manufacturing plants [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. 83, [54] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
HD9502.H62 L38 1999 |
Lau, Lok-hei. Forecasting of daily load curve in power system by machine intelligence system [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. xiii, 129 leaves. : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
HD9581.H782 P66 2002 |
Poon, Tat Chiu. Prediction of future towngas consumption and appraisal of the development of gas industry in Hong Kong = 預測煤氣未來耗用量及評估香港氣體工業的發展 2002. 200 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
HD9661.A2 C54 1999 |
Cheng, Leo Kam-fung. Environmental impact assessment in plastic injection molding industry = 塑膠注射成型工業的環境影響評估 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. viii, 64, [38] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
HD9661.H62 C48 1996 |
Chu, Kwok Fai. Manufacturing information system for Hong Kong - China plastics injection mould making industry Hong Kong : City University of Hong Kong, 1996. ix, 151, 11 leaves : ill. 30 cm. Thesis (M.Sc.)--City university of Hong Kong, 1996. |
|
HD9685.C62 Y48 1998 |
Yeung, Kok-fai. Financing capital works in China's power sector Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1998. x, 72, [15] leaves : ill. 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998 |
|
HD9685.H62 C42 1995 |
Chak, Ting Che. Electricity forecasting and priority setting for electrical enhancement programme in public housing [Hong Kong] : City University of Hong Kong, Dept. of Manufacturing Engineering, 1995. x, 44, [51], 14 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995. |
|
HD9685.H62 C43 1998 |
Chan, Ming-fai. A critical review of the manpower planning & control of building services projects in CLP Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1998. xiii, 93 leaves : ill. 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
HD9685.H62 F86 1993 |
Fung, Yun-hoi. Forecasting of electricity consumption for Hong Kong using artificial neural networks [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1993. viii, 154 leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
HD9685.H62 L38 2005e |
Lau, Wing Chi. An analysis of electricity deregulation : a lesson for Hong Kong 2005. Thesis (M.Sc.)--City University of Hong Kong, 2005. |
|
HD9685.H62 L44 1994 |
Lee, Jun-cheong. Short term electricity load forecasting [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1994. x, 105 leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1994 |
|
HD9685.H62 L5 1993 |
Li, Sho-to. Improving customer service in China Light and Power Company with the satisfaction of the stakeholders Hong Kong : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1993. [xi], 165 leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
HD9685.H62 T66 1999 |
Tam, Agnes Yuk-kwan. Quality-led change management for market orientation in the electric utility industry = 電力工業邁向市場導向之質量帶動改變管理 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. viii, 187 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1999. |
|
HD9696.A3 C64355 2010 |
Chui, Chi Lung. Development and application of a new product screening model for the electronic component distribution industry in China = 開發及應用適合於中國電子零件分銷業的新產品篩選模型 2010. xii, 177 leaves : ill. 30 cm. Thesis (Eng.D.)--City University of Hong Kong, 2010. |
|
HD9696.A3 H625 2002 |
Ho, Man Kit, M. Sc. Competitive strategies for a consumer product design company in Hong Kong = 香港消費品設計商之競爭策略 2002. ix, 85 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
HD9696.A3 H662 1993 |
Wai, Chun-kwok. The Hong Kong electronics industry : a strategic study [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1993. xi, 130 leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
HD9696.A3 H669 1999 |
Lo, Tin-hoi. Design of an integrated quality, safety, health & environmental management system for CLP marketing and customer services (MACS) [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. 167, [35] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
HD9696.A3 H67 1999 |
Wong, Kit-yin. Green product strategy for Hong Kong electronic industry [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. vi, 86 leaves. : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
HD9696.A3 H695 1996 |
Yang, Wen-liang. The design and develop of computerized order monitoring system for medium-sided PCBA factory Hong Kong : City University of Hong Kong, 1996. ix, 118 leaves : ill. 30 cm. Thesis (M.Sc.)--City university of Hong Kong, 1996. |
|
HD9696.C62 C43 1993 |
Chan, King-shan, Tony. Development of cellular manufacturing system for computer magnetic tape recording head manufacturing Hong Kong : City Polytechnic of Hong Kong, Dept. of Manufacturing Engineering, 1993. viii, 135, xxxii leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
HD9696.C62 S58 1996 |
Shum, Siu-kwan. To determine the technical support service attributes Hong Kong : City University of Hong Kong, 1996. 51, 20 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
HD9696.I582 K86 1993 |
Kwok, Kam-ming. A team approach to problem resolution in IC assembly subcontract houses in Hong Kong Hong Kong : City Polytechnic of Hong Kong, Dept. of Manufacturing Engineering, 1993. vii, 99 leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
HD9696.I584 T445 2000 |
Lee, Vince Mei-ling. New product development innovation strategy in TEMIC [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, University of Hong Kong, 2000. ix, 70 leaves : col. ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
HD9696.O672 L48 2001 |
Leung, Raymond Ying Wai. Minimization of the production reject rate in an optical disc manufacturing plant = 減少光碟製造廠的生產不良率 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. vi, 56 leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
HD9696.O673 C65 2005 |
Lau, Daniel Kit. Technology integration of a photonics system in China = 中國光電子系統 : 科技集成應用 2005. 155 leaves : ill. 30 cm. Thesis (Eng.D.)--City University of Hong Kong, 2005. |
|
HD9696.P742 T36 1993 |
Tang, Chi-lam. Assessment of the process of implementation of ISO 9002 in PRC PCB industry [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1993. iv, 143 [150] leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
HD9696.R362 P36 1993 |
Pang, Wing-siu. Developing high technology business in Hong Kong : a case study on mobile telephone business Hong Kong : City Polytechnic of Hong Kong, Dept. of Manufacturing Engineering, 1993. xiv, 166 leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
HD9696.R362 W66 1998 |
Wong, Kent Wah-shun. Cordless phone market analysis and strategies for Vtech to compete in year 2000 Hong Kong : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1998. ix, 83 leaves : ill. (some col.) 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998 |
|
HD9696.S42 C45 2001 |
Chow, Eric Lap Kei. A system engineering approach on the implementation of ISO quality system into concurrent engineering (CE) in automation system development of semiconductor industry = 在系統工程方法下於半導體行業中 ISO 品質系統於並行自動化系統開發中之推行 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. 96, [53] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
HD9696.S42 L48 1996 |
Leung, Wai-kuen. Cost of poor quality system for a semiconductor manufacturing company Hong Kong : City University of Hong Kong, 1996. viii, 74, [17] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
HD9696.S43 C65 2002 |
Ho, Wai Yip. Operations management in semiconductor manufacturing industry of Hong Kong = 香港半導電體製造工業運作管理研究 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2002. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
HD9696.S43 C67 2002 |
Lam, Keng Tim. A case study of the application of the Japanese manufacturing philosophy in improving the operation efficiency of a semiconductor company = 運用日本製造理念在半導體公司以改善工作效率的個案分析 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2002. vi, 101 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2002. |
|
HD9696.T442 P36 1993 |
Pang, Kwok-keung. A case study on customer service quality dimensions : Asian telecommunications satellite transponder leasing industry [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1993. xi, 259 leaves 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
HD9696.T443 A785 2000 |
Ho, Frederick Ka-yu. An application of QFD in satellite operation training = 質量功能推廣應用於衛星操作培訓 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering and Engineering Management, 2000. ix, 81 leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
HD9697.A2 S93 1995 |
Szeto, Io-chong. Reengineering the business processes of an electrical engineering firm [Hong Kong] : Dept. of Manufacturing Engineering, City University of Hong Kong, 1995. ix, 101 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995. |
|
HD9697.A3 C6 1998 |
Tsui, Chan-chung. Strategic analysis of the electricity supply industry (ESI) in Southern China : the implication to Hong Kong ESI Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1998. xi, 92 leaves : ill. 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998 |
|
HD9710.H852 F66 2000 |
Foo, Walter Hang-hing. The marketing of vehicle engineering services in a trading fund environment = 車輛工程服務在營運基金環境下之市場化 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
HD9715.H6 L5 2000 |
Lee, Wai-kwong. ISO 14000 implementation framework for construction project : Housing Department = 為房屋署擬定一套環境保護 ISO14000 建築工程管理模式 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2000. 89 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
HD9715.H62 K36 1996 |
Chien, Chih-kuang Development and implementation of a computerized cost control and information system for a construction company Hong Kong : City University of Hong Kong, 1996. x, 94, [16] leaves : ill. 30 cm. Thesis (M.Sc.)--City university of Hong Kong, 1996. |
|
HD9715.H62 L5 1993 |
Li, Chak-man. Review of quality assurance in local construction industry : recent developments and possible improvements Hong Kong : City Polytechnic of Hong Kong, Dept. of Manufacturing Engineering, 1993. viii, 150, [150] leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
HD9715.H62 L56 2003 |
Lin, Mo Sang. The evaluation of advantages and problems of partnering in the construction industry of Hong Kong = 探討香港建造業[夥伴計劃]之優點及存在問題 2003. x, 54, 5 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2003. |
|
HD9715.9.E432 C45 2001 |
Chung Wai-kin. Enhancement of customer satisfaction in lift industries = 增加電梯顧客滿足感 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. vi, 83 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
HD9736.C62 C45 2006 |
Chan, Chi On. The development and application of six sigma implementation model for HK/China manufacturing companies = 中港製造企業六西格瑪實施模式的開發和應用 2006. vii, 195 leaves : ill. 30 cm. Thesis (Eng.D.)--City University of Hong Kong, 2006. |
|
HD9736.C63 H65 2007 |
Wong, Shui Yee. An organizational innovation management (OIM) framework for the Hong Kong and China manufacturing industry = 香港及中國製造業企業創新管理架構的研究 2007. x, 141 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2007. |
|
HD9736.H62 C43 1997 |
Chan, Kwok Wah. Critical factors of ISO 14000 EMS implementation in Hong Kong Hong Kong : City University of Hong Kong, 1997. vi, 81, 23, [67] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
HD9736.H62 C433 2006e |
Chan, Ngai Yin. The empirical study of technological innovation in HK manufacturing industry 2005. Thesis (M.Sc.)--City University of Hong Kong, 2005. |
|
HD9736.H62 C45 2000 |
Chau, Roni Siu-fai. Develop a performance measurement system for R&D Department in HK manufacturing industry [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2000. viii, 80 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
HD9736.H62 I6 2001 |
Ip, Sidney Sing Ka. Assess agility readiness for Hong Kong manufacturing industries [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. 73 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
HD9736.H62 L38 2002 |
Law, Wing Kin. Prioritization of safety management elements for major manufacturing industries in Hong Kong = 香港主要製造行業之安全管理元素排序 2002. xiv, 184, [12] leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2002. |
|
HD9736.H62 L43 1998 |
Lee, Humphrey Yuk Hang. Strategic model for global competitiveness of Hong Kong manufacturing industries [Hong Kong] : [Dept. of Manufacturing Engineering and Engineering Management], City University of Hong Kong, 1998. xiii, 166, 6 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1998 |
|
HD9736.H62 W66 2002 |
Wong, Yim Ling. Investigation of contemporary knowledge management and its adoption methodology to local manufacturing enterprises in HK 2002. 73 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
HD9787.C63 H63 2006e |
Chan, Chi Hang. The buying behaviour of a shoes store = 鞋店客戶的消費特性 2006. Thesis (M.Sc.)--City University of Hong Kong, 2006. |
|
HD9940.H62 F86 1993 |
Fung, Kin-keung. The transformation of Hong Kong clothing industry Hong Kong : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1993. xii, 146 leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
HD9970.5.C672 L38 2005e |
Lau, Bessy Pui Sze. A kansei-oriented supporting system : to provide searching of hand cream products = 顧客支援由感性工學做起 : 有助搜尋潤手霜 2005. Thesis (M.Sc.)--City University of Hong Kong, 2005. |
|
HD9970.5.T654 C64 2000 |
Lin, Colman Chi-sing. A study of vertical integration for strategic material supply in Colgate-Palmolive = 高露潔棕欖公司用縱向合併於策略性物料供應之硏究 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2000. vi, 65 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
HD9971.H62 F36 1997 |
Fan, Wai Kit. Studying critical factors for successful new product development in small and medium sized Hong Kong household appliances manufacturers Hong Kong : City University of Hong Kong, 1997. vii, 57, [14] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
HD9971.5.E544 A65 2000 |
Leung, Kin-sing. Performance measurement system in new product development for Appliances Hong Kong Limited = 電器製造商在新產品發展過程中之表現量度系統 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, 2000. x, 63 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
HD9980.5 .F8 1996 |
Fu, Wai-hung Vincent The integrated improvement of maintenance management in a service organization Hong Kong : City University of Hong Kong, 1996. xiv, 79, [47] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
HD9993.T692 T35 1993 |
Tam, Wai-keung. A systems approach to planning, implementing and managing computer-aided-design technology for a toy company in Hong Kong [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1993. xiii, 138, iv leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
HD9993.T693 C6344 2006 |
Chan, Tony Ching Tung. Strategic sourcing in the Hong Kong toy industry = 香港玩具業之策略性採購 2006. xvii, 314 leaves : ill. (some col.) 30 cm. Thesis (Eng.D.)--City University of Hong Kong, 2006. |
|
HD9993.T693 H634 1996 |
Kong, Kam-chiu. Product variety strategies of Varicraft Manufactory Limited Hong Kong : City University of Hong Kong, 1996. xiii, 116, [16] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
HD9993.T693 H6345 2002 |
Lam, Alan Chi Lun. Future development of Hong Kong toys industry 2002. xi, 68, 6 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
HD9993.T693 H635 2000 |
Leung, Angus Kam-yiu. Development of an integrated concurrent engineering system for three toys companies : a strategic linkage of marketing and manufacturing strategies [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2000. viii, 37 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
HD9993.T693 H636 2000 |
Ma, David Siu-keung. Total project management model in a toy car manufacturing company = 一間玩具車製造公司的全面項目管理模型 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. xi, 191 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
HD9993.T693 H68 2000 |
Wong, John Chun-wing. Critical success factors and model of new product development for a toys company = 一所玩具公司在新產品發展之關鍵成功要素及模式 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2000. ix, 76 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
HD9999.C583 H65 1999 |
Lai, Yiu-chung. Exploration of China domestic market : Hong Kong watch and clock manufacturers' perspectives Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
HD9999.L382 M32 1993 |
Ma, Wai-yan. Problems in the laundry business of the HK Correctional Services Industries [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1993. x, 70 [17] leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
HD9999.S453 A788 2005e |
Yeung, Alex Tak Lok. A competitive analysis of digital video surveillance products' manufacturers in Asia Pacific region = 亞太區數碼監控產品生產商競爭力分析 2005. Thesis (M.Sc.)--City University of Hong Kong, 2005. |
|
HE336.T64 S96 1993 |
Sung, Cheuk-kan, Stephen. Impact of using automatic vehicle identification at the Aberdeen Tunnel [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1993. vi, 116 leaves 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
HE336.T64 W66 1994 |
Wong, Kam-to, Danny. Improved operations for automatic toll collection system at the Cross Harbour Tunnel [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1994. viii, 80, 21 leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1994 |
|
HE336.T7 C45 1997 |
Chung, Raymond Wah Fan. Forecasting traffic generation in public housing estates Hong Kong : City University of Hong Kong, 1997. vi, 29, [7] leaves : ill. 30 cm. + 1 computer disk (3 1/2 in.) Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
HE1621 .C45 2001 |
Chan, Raymond Ping-kwan. Deveplopment of E-integrated Project Management System (EIPMS) for railway construction project = 開拓/發展電子綜合工程計劃管理系統 (應用於鐵路建造工程) [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. vii, 105 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
HE1621 .L38 2001 |
Law, Edward Man Yuen. Evaluation of the application of value management in railway development projects = 鐵路發展工程中價值工程應用之硏究 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. 102 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
HE1621 .Y44 2002 |
Yee, Hung Choi Quality management of software development in railway industry = 鐡路工業軟件開發之品質管理 2002. 1 v. (various pagings) : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
HE1830 .T56 1993 |
Ting, Kwing-hung. Project management approach to rolling stock improvement projects Hong Kong : City Polytechnic of Hong Kong, Dept. of Manufacturing Engineering, 1993. xi, 175 leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
HE4341 .L35 2005e |
Lam, Chun Kwan. Selection of smart card for metro transport system 2005. Thesis (M.Sc.)--City University of Hong Kong, 2005. |
|
HE5701.A6 C45 2000 |
Chiu, Yue-wing. Cost benefit analysis on full scale use of LPG taxis in Hong Kong = 在香港全面推行石油氣的士的成本效益分析 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2000. ix, 62 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
HE5701.Z7 T35 2005e |
Tam, Mei Na. The investigation of green-mini bus service = 綠色小巴服務的探討 2005. Thesis (M.Sc.)--City University of Hong Kong, 2005. |
|
HE7661 .C53 1999 |
Chan, Wai-keung. Service quality dimensions in telecommunications service industry = 電訊服務業之服務質量標準硏究 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. viii, 94 leaves. : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
HE7661 .L38 1999 |
Lau, Christopher Chun-sing. World-wide benchmarking and quality improvement on international roaming service in telecommunication utility = 國際漫遊服務 : 世界基準評估及質量服務改善 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. vi, 89 leaves. : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
HE8444 .S63 1999 |
So, Simon Ka-keung. Strategy review of Fixed Telecommunication Network Services (FTNS) industry in Hong Kong = 香港電訊業策略分析 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. x, 145 leaves. : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
HE8444 .W66 1999 |
Wong, Sam Sum-ching. A strategic analysis on the business of video on demand services in Hong Kong = Hu dong dian shi zhi shi yi ce lue fen xi = 互動電視之市塲策略分析 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. ix, 58 leaves. : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
HE8699.H6 L38 1993 |
Lau, Hing-tung. Managing radio broadcast automation system in Radio Television Hong Kong [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1993. x, 173, [25] leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
HE8700.72.H6 W66 2001 |
Wong, Joseph Kim Ying. Technological development strategy in i-CABLE : "one network two systems" [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. 186 leaves : ill. 30 cm. Thesis (M.A.)--City University of Hong Kong, 2001. |
|
HE8700.9.H6 L85 1997 |
Lui, Lai-hung. Strategy of improving Wharf Cable TV distribution services Hong Kong : City University of Hong Kong, 1997. 132 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
HE9492 .N4 1993 |
Ng, Chung-yee. Voicegrade Operation Section of Hongkong Telecom : the impact of organisation development strategies [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1993. 80, [104] leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
HE9713 .T36 2001 |
Tang, Amos Chun Kin. A case study : technological development strategies of mobile services in information era = 資訊年代流動電話服務之技術發展策略 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. xvi, 152 [8] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
HE9788.5.H85 L35 1997 |
Lam, Kit-ming. Improving the response time of breakdown maintenance for the new air cargo terminal of HACTL Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1997. 67, [11] leaves : ill. 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997 |
|
HF5413 .N425 2002 |
Ng, Karin Wing Yee Recommending a framework of environmental labeling scheme implementation for Hong Kong industry [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2002. vii, 127 leaves : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2002. |
|
HF5415.15 .S525 1996 |
Shek, Kok-fai Kenneth. Marketing models in industrial product strategy Hong Kong : City University of Hong Kong, 1996. xii, 115 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
HF5415.153 .C45 2005e |
Cheung, Sarah Wai Ying. Product specification management practices in new product development : an exploratory study of the Hong Kong electronic industry 2005. Thesis (M.Sc.)--City University of Hong Kong, 2005. |
|
HF5415.153 .C46 2004 |
Chong, Pui Yik. Diffusion of new product style : a total 'sales appeal' forecasting approach for product aesthetic design = 新產品式樣擴散 : 產品美觀設計的全面「銷售吸引力」預測方法 2004. xiv, 212 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2004. |
|
HF5415.153 .L38 1999 |
Lau, Yiu-wing. Improving the manufacturing process of new products using super model = Ying yong chao ji mo shi yu gai shan xin chan pin zhi zao guo cheng zhi yan jiu [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. viii, 42 leaves. : ill. (1 col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
HF5415.155 .L38 2006e |
Lau, Alfred Shuk Yin. Analysis and improvement of the product life cycle in an electronic product manufacturing company = 分析及改善電子製造公司之產品週期 2006. Thesis (M.Sc.)--City University of Hong Kong, 2006. |
|
HF5415.2 .C463 2008 |
Cheong, Veng Va Matthew. Pricing of a cosmetic product from the consumer feeling perspective = 從顧客的感性角度來擬定化妝品在市場上的價格 2008. ix, 253 leaves : ill. 30 cm. Thesis (Eng.D.)--City University of Hong Kong, 2008. |
|
HF5415.5 .C43 1993 |
Chan, Kam-fai Andrew. High quality service management Hong Kong : City Polytechnic of Hong Kong, Dept. of Manufacturing Engineerig, 1993. 130 leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
HF5415.5 .L355 2005 |
Lam, Lai Ki. Adoption of Customer Relationship Management (CRM) in local manufacturing industry = 客戶關係管理 (CRM) 軟件在本地製造業的採用 2005. xi, [176] leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2005. |
|
HF5415.5 .T53 2002 |
Ting, Kwok Tai. Design of a customer relationship management (CRM) system for a typical electronic company = 為電子業設計的客戶關係管理系統 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2002. ix, 91 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
HF5415.52 .C45 2000 |
Choi, Yuk-kai. Enhancement of the complaint management system in AVX/Kyocera Asia Ltd = AVX/Kyocera Asia Ltd 顧客投訴機制的改進建議 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2000. 60 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
HF5429.12 .P66 2000 |
Poon, Queenie Yin-kwan. A study on consumer attitudes towards e-retailing in Hong Kong using q-methodology Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. v, 112 leaves : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
HF5439.A43 C45 2002 |
Chan, Man Wing. The development of air-conditioning parts' online shop = 空調零件網上商店的開發 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2002. 108 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
HF5439.M6 W66 2002 |
Wong, Alen Ka Lun. Development of a sales technical information presentation system for truck sales = 貨車銷售及技術資料系統之開發 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2002. vi, 66, [55], : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
HF5548 .F66 1993 |
Foo, See-lai, Silas. Material planning & control for Faculty of Science & Technology of City Polytechnic of Hong Kong [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1993. vii, 95, [29] leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
HF5548.2 .P598 1996 |
Poon, Kam-tong Herman Office automation of Fairlead Pacific Insurance Consultants Ltd Hong Kong : City University of Hong Kong, 1996. viii, 105 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
HF5548.325.H85 L6 2002 |
Lo, Kwong Chi. The strategies of developing virtual shopping mall in Hong Kong = 香港虛擬購物商場之發展策略 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2002. ix, 122 leaves : col. ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
HF5548.325.H85 T75 2001 |
Tsai, Hsiung Wu. A study of business opportunities in B2E sector of E-business market = 企業對員工模式在電子商務市場的商機硏究 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. ix, 98, 6, 58 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
HF5549.5.D55 T66 2001 |
Tong, Anson Kin-keung. The aftermath of downsizing : "survivors' syndrome" in a utility company = 精簡架構之餘波 : 一所公用事業機構內的 "倖存者綜合病症" [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. xii, 104 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
HF5549.5.T8 W36 2002 |
Wan, Hoi Ming. Part-time employee turnover in betting call centre of the Hong Kong Jockey Club = 兼職員工離職意向的因素 2002. vi, 95 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
HF5686.C8 .T75 2000 |
Tse, Norris Tat-cheong. Improving the product costing by applying activity based costing in artesyn technologies Asia-Pacific Ltd (ATAP) = 應用程序成本學來改善騰訊科技亞太有限公司的產品成本 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2000. 69 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
HF5686.C8 Z36 2000 |
Zang, Stephen Hak-cheong. Evaluation and establishment of job costing system in GSPPL = 檢討及建立 "綠寶印刷" 之成本會計系統 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2000. x, 50, iii leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
HF6146.T42 Y48 1997 |
Yeung, Ming-Chit. Consumption values, social values, and advertising strategies in China : a comparison of television commercials on Hong Kong, the People's Republic of China and Taiwan Hong Kong : City University of Hong Kong, 1997. x, 121 p. : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong. |
|
HG3755.8.H85 C48 2002 |
Chui, Kelly Kar Yee. The credit card re-engineering process = 信用咭系統改造工程 2002. iii, 67 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
HG4529.5 .T66 2004 |
Tong, Tak Chi. A new descent direction method for linearly constrained continuous optimization problems and its application in portfolio management = 一種新的下降方法及在投資組合中的應用 2004. v, 46 leaves 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2004. |
|
HG5774 .C45 1997 |
Chang, Yuk Ying. Anomalies, risk, and Japanese stock returns Hong Kong : City University of Hong Kong, 1997. viii, 77 leaves : col. ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1997. |
|
HG5782 .K86 1998 |
Kwong, Chi-ming. The global competitiveness analysis of Taiwan manufacturing firms in Southern China Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1998. viii, 47, [12] leaves : ill. 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
HG5782 .L625 1998 |
Lo, William Wai-lam. The collaboration study of HK/China manufacturing industries in Pearl River Delta (PRD) : a global competitiveness analysis Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1998. x, 55 leaves : ill. 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
HT395.C62 L63 2008 |
Lo, William Wai-lam. An interdisciplinary study of regional innovation system and technological innovation capabilities in HK/PRD manufacturing industries = 香港/珠三角製造業的區域創新系統與科技創新能力研究 2008. x, 226 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2008. |
|
HV8263.A2 C43 2002 |
Chan, Pak Kwan. A study on perception of service priority of service providers and customers in the delivery processs of police service 2002. vii, 92, [71] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
JQ1539.5.A67 I6 2000 |
Ip, Kin-ping. Employees' attitude towards the Civil Service reform in EMSD : implications for strategic human resource management = 機電工程署員工對公務員體制改革的態度 : 策略性人力資源管理的影響 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. v, 70, [19] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
KNR7.8.C65 C48 2008 |
Chung, Wai Keung David. An interoperable digital rights management (DRM) platform based on ISO MPEG-21 framework for the Hong Kong creative industries = 為香港創意工業而設應用國際 MPEG-21 標準的一體化數碼版權管理平台 2008. v, 236 leaves : ill. 30 cm. Thesis (Eng.D.)--City University of Hong Kong, 2008. |
|
LB1028.35 .L43 1996 |
Lee, Suet-chung. Establishment of a job shop control system for the Mechanical Workshop of HKUST Hong Kong : City University of Hong Kong, 1996. vii, 99, [59] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
LB1028.35 .L48 1996 |
Leung, Kwok-wai. A structured approach to the development of a computerized maintenance management system Hong Kong : City University of Hong Kong, 1996. viii, 63, 17 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
LB1032 .Y56 2007 |
Yin, Ying. Investigation of the motivating factors influencing team learning = 激勵因素對團隊學習的影響之研究 2007. x, 214 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2007. |
|
LB1043.2.H6 C44 2000 |
Chik, Kin-yan. New educational technology evolution : a strategic plan for audio visual service upgrading in CUHK = 教育新科技發展 : 提升視聽支援服務之策略性計劃 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2000. viii, 91, xxiii, 3 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
LB3415 .C45 2006 |
Chong, Yin Ling. Occupational health problems for teachers from primary and secondary schools in Hong Kong = 香港中小學教師的職業健康問題 2006. xi, 168 leaves 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2006. |
|
NA2728 .L584 1994 |
Liu, Sai-lok, Eric. Managing the computer aided design and drafting system in an architectural firm [Hong Kong] : Dept. of Manufacturing Engineering, City University of Hong Kong, 1994. vi, 70 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1994 |
|
Q387 .C45 2006 |
Chan, Ting Hong. Design an integrated knowledge representation (IKR) model = 整合式知識表示模型的設計 2006. vii, 88, 35, 5 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2006. |
|
QA76.575 .S86 2000 |
Sun, Paul Po. Factors affecting adoption of networked multimedia for small organizations in Hong Kong = 影響香港小型企業採用網絡多媒體的因素 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. iv, 108 leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
QA76.76.C672 L35 2001 |
Lam, Fung Chi. Design and development of a computer interactive toy with TV game = 設計及開發電腦互動玩具 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. x, 93, [50] leaves : col. ill. 30 cm. + 1 computer optical disc (4 3/4 in.) Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
QA76.76.I59 C43 2002 |
Chan, George Kai A virtual Hong Kong Science Museum : web-based virtual environment generation [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2002. iii, 134 leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2002. |
|
QA76.76.I59 S625 2002 |
So, Yin Ching A web based virtual reality touring for Hong Kong Science Museum [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2002. 198 p. : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2002. |
|
QA76.76.Q35 W66 1993 |
Wong, Yin-wa, Susanna. Software metrics for computer centres in academic institutions [Hong Kong : Dept. of Manufacturing Engineering], City Polytechnic of Hong Kong, 1993. 94 leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
QA76.76.V47 N45 2010 |
Ng, Pin. Applying formal concept analysis in requirements validation with UML state machine model = 應用形式概念分析於以 UML 狀態機圖為基礎的需求驗證 2010. x, 109 leaves : ill. 30 cm. Thesis (Eng.D.)--City University of Hong Kong, 2010. |
|
QA76.87 .H826 2009 |
Huang, He. State observer and filter design for delayed neural networks = 延時神經網絡的狀態觀測器與濾波器設計 2009. xiv, 193 leaves 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2009. |
|
QA76.9.A25 F85 2004e |
Fung, Ching-mei The implementation procedures for information security management 2004. Thesis (M.Sc.)--City University of Hong Kong, 2004. |
|
QA76.9.A25 L589 2009 |
Liu, Zhaohua. Chinese MPEG-21 rights expression language : enhancing digital rights management adoption to digital libraries in Hong Kong = 中文化 MPEG-21 權限描述語言 : 加強數字權限保護在香港數字圖書館中的應用 2009. x, 149 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2009. |
|
QA76.9.A43 H83 2009 |
Huang, Yuanhao. Novel algorithms for phase extraction from one single shearographic fringe pattern and the recovery of obscured data = 單幅激光剪切散斑干涉條紋圖提取相位算法的研究及缺損數據的修復 2009. xvi, 142 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2009. |
|
QA76.9.D26 M29 2001 |
Ma, Zongmin. Imprecise and uncertain engineering information modeling in databases = 不精確和不確定工程信息的數據庫建模 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. xxv, 244 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2001. |
|
QA76.9.H85 B5 2004 |
Bi, Dexue. Dynamics identification and implementation for enhanced haptic display = 基于増强触觉显示的动力学模型识别与应用 2004. viii, 211 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2004. |
|
QA76.9.H85 S554 2007 |
Siu, Helen Hon Yee. An investigation of the basic elements for human-computer interaction from the aspect of psychological feelings = 與電腦感覺交流元素的研究 2007. ix, 138 leaves : ill. (some col.) 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2007. |
|
QA76.9.S88 L475 1999 |
Leung, Kwok-hang. Reduction of product development time under incomplete and continuous-changed customer requirement [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. x, 63, [10], 17 leaves. : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
QA76.9.U83 W66 2000 |
Wong, Wang-fai. Design and development of an interface system for automating the flexible use of design data = 設計及發展介面系統作自動化設計資料應用 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong. |
|
QA166.245 .M3 2009 |
Ma, Wei. A deterministic annealing approach to the graph partitioning problem = 求解圖的分割問題的一種確定性退火算法 2009. iii, 40 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2009. |
|
QA280 .O98 2010 |
Ouyang, Gaoxiang. Nonlinear time series analysis and its applications to absence seizure EEG = 非線性時間序列分析及其在失神發作腦電中的應用 2010. x, 103 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2010. |
|
QA402.3 .C537 2008 |
Chen, Meng. Robust filter design of Takagi-Sugeno fuzzy systems and its applications = Takagi-Sugeno 模糊系統魯棒濾波器設計及應用 2008. xii, 205 leaves 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2008. |
|
QA402.35 .Q25 2009 |
Qi, Chenkun. Modeling of nonlinear distributed parameter system for industrial thermal processes = 工業熱過程非線性分佈參數系統建模 2009. xviii, 187 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2009. |
|
QA402.35 .Z43 2008 |
Zhang, Tiejun. Control of nonlinear industrial systems : approximate model based approaches = 非綫性工業系統的控制 : 基於逼近模型的方法 2008. xvii, 238 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2008. |
|
QA447 .C43 1999 |
Chan, Chi-wo. Extracting geometric features from a virtual environment Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
QA447 .C54 2000 |
Chu, Koon-yan. Extracting geometric features from a virtual environment = 虛擬環境中幾何體的重構 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. xiii, 91 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2000. |
|
QC189.5 .C45 2009 |
Chan, Yiu Ting. Response of excited magnetorheological fluid along the field direction = 磁化磁流變體沿磁場方向的反應 2009. xiii, 103 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2009. |
|
QC611.98.C47 K85 2003 |
Kwong, Fung Luen Microwave heat treatment of bi-based high temperature ceramic superconductors = 鉍系陶瓷高溫超導體之微波燒結 2003. xii, 151 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2003. |
|
QH212.A78 Y835 1999 |
Yuen, Chun-kit. Literature survey on recent research and development of atomic force microscopy Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
QH450 .S86 2010 |
Sun, Yonghui. Dynamic analysis and modeling of biochemical regulatory networks = 生化調節網絡的建模及動力學分析 2010. x, 158 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2010. |
|
QH585.5.M52 X53 2010 |
Xie, Yu. Study on robot-assisted microinjections on zebrafish embryos : micro force measurement and control = 面向斑馬魚卵細胞的計算機輔助微注射研究 : 微力測量及控制 2010. x, 97 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2010. |
|
QH645.5 .T36 2010 |
Tan, Youhua. Cell mechanical modeling and mechanical properties characterization = 細胞力學建模及其力學特性的表徵 2010. x, 142 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2010. |
|
QK99.A1 C46 2006 |
Chong, Hiu Fung Johnson. Investigation of the controls of the extraction processes for the production of the herbal medicine concoction = 中草藥藥劑提取控制過程的探討 2006. iix, 110 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2006. |
|
QP334 .L6 2001 |
Lo, Wing-shing. Evaluation the effects of interface factors on the handgrip and pinchgrip force exertion capabilities, muscular contraction speed and endurance [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
QP474 .C43 1998 |
Chan, Chung-yin. Validating random search model for competitive search for double targets Hong Kong : City University of Hong Kong, 1998. 1 v. (various pagings) : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 1998. |
|
QP474 .L56 1998 |
Lin, Wai Ki Development of computerised visual search models for prediction of search performance and determination of optimum cost models Hong Kong : City University of Hong Kong, 1998. 1 v. (various pagings) : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 1998. |
|
QP475 .C44 2003 |
Chan, Wai Lun. The spatial stimulus-response (S-R) compatibility effect of visual and auditory stimulus = 光與聲在刺激-反應中的空間相容效應 2003. vi, 118 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2003. |
|
QP475 .C443 2010 |
Chan, Wai Lun. Spatial stimulus-response (S-R) compatibility effects for visual signals with hand and foot controls = 視覺訊號與手腳操縱器的運用在刺激與反應中的空間相容效應 2010. v, 129 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2010. |
|
QP475 .C45 2008 |
Chiu, Hiu Yin. Visual lobe shape characteristics for different subject, training, and task factors = 不同實驗對象, 訓練及工作情況下之人類視野形狀 2008. xiii, 218 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2008. |
|
QP475 .H85 1998 |
Hui, Kwok-kee. Computerised measurement of visual lobe area Hong Kong : City University of Hong Kong, 1998. 50, [61] leaves : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 1998. |
|
QP475 .M225 2002 |
Ma, Chi Wang. Effect of stimulus scaling on visual lobe characteristics = 刺激物比例對有效視野的影響 2002. xv, 254 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2002. |
|
QP475 .S825 2003 |
So, Derek Ka Tsun. Visual lobe shape and search performance = 人類視野形狀及搜尋表現 2003. ix, 115, xv leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2003. |
|
QP493 .W83 2008 |
Wu, Shandong. Signature descriptions for motion trajectory representation, perception, recognition and reproduction = 面向運動軌跡表示, 感知, 識別和重建的簽名描述 2008. xv, 160 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2008. |
|
R859.7.D42 Y36 2010 |
Yang, Jinglin. Probabilistic learning based decision making under uncertainty with application to biomedical process = 不確定環境下基於概率學習的決策系統及其在生物醫學過程中的應用 2010. xiv, 145 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2010. |
|
RA967.9 .C47 1996 |
Cheung, Ping-kuen Michael. Development of an energy management programme for public hospitals in Hong Kong Hong Kong : City University of Hong Kong, 1996. xii, 84, [51] leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
RA968 .T35 1995 |
Tam, Chi-wah. Management information systems for effective piped medical gas works maintenance in hospitals [Hong Kong] : Dept. of Manufacturing Engineering, City University of Hong Kong, 1995. v, 66 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995. |
|
RC683.5.A9 C45 2004e |
Chu, Man-kwong. Preliminary study of visualization as an aid to heart sound listening for biomedical experimental use 2004. Thesis (M.Sc.)--City University of Hong Kong, 2004. |
|
RD686 .C45 2000 |
Ching, Lai-to. Visualization and geometric modelling of human joint structures in a virtual environment for custom implant design = 虛擬現實環境中人體關節模型的檢視與修改以利人工關節設計 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. 77 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2000. |
|
T55 .C43 1993 |
Cheung, Kwong-chief. Impact assessment of safety and health at work from the perspectives of engineering management in Hong Kong Hong Kong : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1993. 180 leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
T55 .L335 1998 |
Lam, Shun-wong. Development of an information support system for safety and health operation = 發展安全及健康工作的資訊系統 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1998. xii, 72, 14 leaves. : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
T55 .M325 1998 |
Ma, Gary Chong-hoi. A modeling method for office safety management system Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1998. viii, 82 leavs : ill. 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
T55 .Y835 2002 |
Yu, Yanny Hoi Kuen Online analysis on occupational safety and health [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2002. 1 v. (varoius pagings) : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2002. |
|
T55.3.P67 L38 2001 |
Lau, Siu-ping. Interaction of signal words and background colours [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. vii, 137 leaves. : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
T56.8 .C425 1999 |
Chan, Wai. Integration of project management and equipment design processes : case study, problem identification and general solution = 項目管理及機器設計程序綜合規納 : 分析案例, 確定問題, 提出通用解決方案 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. viii, 118 leaves. : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
T56.8 .C43 1998 |
Cheng, Denny Man-lung. Improving the project management system in a manufacturing company Hong Kong : Dept.of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1998. ix, 44, [16] leaves : ill. 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
T56.8 .K96 1997 |
Kwok, James Kai Yiu. Project evaluation and selection in the MTRC Hong Kong : City University of Hong Kong, 1997. v, 42, [36] leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
T56.8 .L25 1996 |
Lam, Wai-keung Analysis of HMP Unit 7 Projects : a project management perspective Hong Kong : City University of Hong Kong, 1996. viii, 76, [17] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
T56.8 .L47 1998 |
Leung, Kwan-hung. An integrated decision support system for concurrent project management Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1998. viii, 118, [27] leaves : ill. 31 cm. Thesis (M.Phil.)--City University of Hong Kong, 1998. |
|
T56.8 .L48 1994 |
Leung, Tsun-ho. Development of total quality management framework in P&P Sub-division, General Electronics Division of Electrical and Mechanical Services Department [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1994. xii, 108, [19] leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1994 |
|
T56.8 .L483 1997 |
Leung, Hon Ming. Knowledge based project risk management Hong Kong : City University of Hong Kong, 1997. x, 126, [23] leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1997. |
|
T56.8 .L525 1999 |
Li, Kai-yip. Project-oriented engineering information system for a beverage can company = 飲料罐公司專項導向工程資訊系統 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. xi, 134, 12 leaves. : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
T56.8 .L53 1996 |
Liang, Chi Kai. Integrated computer modeling and stochastic project management Hong Kong : City University of Hong Kong, 1996. xi, 146, [26] leaves : ill. 30 cm. + 2 computer disks (3 1/2 in.) Thesis (M.Phil.)--City University of Hong Kong, 1996. |
|
T56.8 .L86 1995 |
Lun, Sing-biu. Selection of a project management structure in an engineering organization [Hong Kong] : Dept. of Manufacturing Engineering, City University of Hong Kong, 1995. viii, 82 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995. |
|
T56.8 .M34 2002 |
Man, William Ngai Fan. Project management in a local mobile phone communications company = 本地某流動電話通訊公司的項目管理 2002. viii, 76 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
T56.8 .N45 2000 |
Ng, Man-hong Project risk management in large scale projects = 大型工程項目上之風險管理 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. xiii, 67, 14, 6 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
T56.8 .P66 2002 |
Poon, Yan Min. A review of the effectiveness of partnering on large-scale railway project in Hong Kong 2002. x, 71, [25] leaves : ill. (some col.), col. map 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
T56.8 .T35 1998 |
Tang, Shiu-hung. Improving the CCL project management effectiveness Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1998. x, 79 leaves : ill. 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998 |
|
T56.8 .T36 1993 |
Tang, Yiu-cheung. Project management in a consulting engineering firm Hong Kong : City Polytechnic of Hong Kong, Dept. of Manufacturing Engineering, 1993. ix, 179, [23] leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
T56.8 .W66 2002 |
Wong, Kai Ming. Review of the automated refuse collection system project from the project management perspective = 從項目管理層面探討自動廢物收集系統工程 2002. ix, 83 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
T56.8 .Y48 2002 |
Yeung, Ida Suk Yin. To evaluate and improve the project management system of the micro-motor manufacturing company = 微型馬達製造公司項目管理系統的評估和改善 2002. 62, [1] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
T57.6 .C96 2003 |
Cheng, Shu Kin. A study on two-dimensional layout : efficient clustering and nesting of arbitrarily-shaped patterns and stocks = 二維多變圖形和原材料的高效率群集和築建 2003. xx, [164] leaves : ill. 30 cm. + 1 CD-ROM (4 3/4 in.) Thesis (Ph.D.)--City University of Hong Kong, 2003. |
|
T58.5 .C458 1997 |
Chiu, Samuel Kan Cheung. The simultaneous project management in the government information technology projects Hong Kong : City University of Hong Kong, 1997. ix, 60 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
T58.6 .K64 2000 |
Koo, Kevin. Web base information system in 21st century cigarette manufacturing in Hong Kong = 廿一世紀香港煙草製造業的網上資訊糸[i.e.系]統 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. 1 v. (various pagings) : col. ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong. |
|
T58.62 .C532 2000 |
Chen, Weizhong. Development of a proposal generating system for e-commerce solutions = 建立電子商務實現方案報價系統 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. vi, 98 leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
T58.62 .Y86 2000 |
Yung, Christopher Chak-wah. Decision support system for the motor drive selection = 馬達選擇決定支援系統 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. x, 88, leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong. |
|
T58.64 .C425 2001 |
Chan, Wai-lung. Design and implementation of a project management information system using web technology [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. viii, 151 leaves. : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
T58.64 .C44 2001 |
Chiu, Smiley Chung Wai. Process re-engineering of project management information system for documentation in product development = 產品發展文件項目管理資訊系統之流程重組 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. xiv, 163 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
T58.64 .C45 1999 |
Chu, Kwing-Lun. Design of shop floor information system for semiconductor final test operation = 半導體元件測試生產部資訊系統的設計 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. viii, 97 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong. |
|
T58.64 .D66 2006 |
Dong, Chao. An empirical study of CSFs and the development of the PDES for IS projects in the mainland of China = 中國內地信息系統項目關鍵成功因素實證研究暨診斷與測評系統設計 2006. xiii, 235 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2006. |
|
T58.64 .T36 1997 |
Tam, Wing Tai. To develop software process improvement project implementation approach in research and development environment Hong Kong : City University of Hong Kong, 1997. ix, 118 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
T58.64 .T37 2000 |
Tang, Laurie Chak-lung. An interactive product information system on the web environment for album manufacturing company = 互聯網上的相簿製造互動資訊系統 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. viii, 79 leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
T58.64 .T76 1997 |
Tsoi, Sam Hon-sum. A project management information system (PMIS) for Hong Kong Museums Hong Kong : City University of Hong Kong, 1997. ix, 88, [9] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
T59.2.H85 L525 2003 |
Li, Rico Ka Ching. Standardization of Hong Kong's manufacturing enterprises 2003. 82, [2] leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2003 |
|
T60.5 .L525 2003 |
Lee, Suk Kuen, M. Phil. Development of predetermined Chinese communication times = 中文傳意預定時間系統之建立 2003. xi, 212 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2003. |
|
T174.3 .D66 2008 |
Dong, Qiuling. A study on international technology transfer critical factors in Hong Kong/Pearl River Delta manufacturing industries = 對香港/珠三角地區製造業於國際技術轉移中的重要因素之研究 2008. vii, 128, 4, 3, 1, 4 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2008. |
|
T175.5 .W66 2001 |
Wong, Hoi Keung. A study to improve the performance of the R&D Department = 改進硏究及開發部門的表現 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. xii, 86 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
T357 .L38 1996 |
Lau, Yuk-fai An efficient recognition system of mechanical drawing Hong Kong : City University of Hong Kong, 1996. x, 110 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1996. |
|
T379 .C45 2001 |
Chan, Yuk Chuen. Development of web based filing system for handling mold drawings = 開發互聯網模圖具圖庫處理系統 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2002. 112 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
T385 .S629 2005 |
So, Yin Ching. A series of surface fitting strategies for procedure optimization in reconstructing high quality surfaces = 一系列配合方案締造更佳之重組高質曲面程序 2005. ix, 158 leaves : ill. (some col.) 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2005. |
|
TA157 .F64 2007 |
Fok, Wing Huen. A critical review on the effectiveness of HKIE training scheme 'A' for civil engineering graduates = 香港工程師學會見習土木工程師 'A' 訓練計劃的成效分析 2007. x, 310 leaves : ill. (some col.) 30 cm. Thesis (Eng.D.)--City University of Hong Kong, 2007. |
|
TA166 .L38 2002 |
Law, Chi Sing. Ergonomics control room design = 人機工程學控制室設計 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2002. v, 67, [56] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
TA166 .T73 1999 |
Tsang, Jason Hing-lung. ErgoEasy : self-assessment software on ergonomics Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
TA166 .W56 1999 |
Wong, Alan Kai-keung. Teaching kit on ergonomics Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
TA169.6 .L48 2009 |
Leung, Tsz Chung. Automatic retreading of spectral faulty features from defective rolling element bearings by using reassignment wavelet and higher order statistical analysis 2009. 110 leaves : col. ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2008. |
|
TA169.6 .T36 1998 |
Tam, Ben Kam-wai. Development of a recurrent neural network designing tool for the prediction of machine fault trend Hong Kong : City University of Hong Kong, 1998. vii, 99 P. : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 1998. |
|
TA175 .L35 1997 |
Lai, Kwok-kei. 3D object interpretation from a rough 2D line-drawing Hong Kong : City University of Hong Kong, 1997. xii, 163 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1997. |
|
TA190 .L34 2005e |
Lam, Tommy Kwok Wing. The project management practice in engineering project department in CLP Power 2005. Thesis (M.Sc.)--City University of Hong Kong, 2005. |
|
TA357 .T36 1998 |
Tang, Frederick Kwong-hung. The study of shear flow characteristics of electro-rheological fluid under sliding electrode configuration Hong Kong : City University of Hong Kong, 1998. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 1998 |
|
TA357 .Y38 1998 |
Yau, Kin-wong. Study of damping characteristics of electrorheological fluids on a spring mass system with single degree of freedom Hong Kong : City University of Hong Kong, 1998. 119, [63] leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 1998. |
|
TA416 .J53 2003 |
Kian, Kwok Cheong. Enhancement of the operation of an engineering teaching laboratory = 工程教學實驗室的運作改善研究 2003. xvii, 199 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2003. |
|
TA416.5.H6 L38 2001 |
Lau, Wing Kit. Linking customer satisfaction attributes with process metrics in Hong Kong commercial laboratory = 聯繫使客戶滿意的特質至香港商業實驗室的流程規格 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. ix, 124 leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
TA417.43 .C45 2010 |
Chan, Wan Yin. Development of improved reflective fringe pattern technique for subsurface flaw detection on objects with specularly reflective surfaces = 反光條紋圖案技術的改進發展及在表面反光物件底層缺陷探測的應用 2010. 226 leaves : ill. (some col.) 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2010. |
|
TA417.5 .C45 2009 |
Chen, Yunshen. Development of improved active thermographic techniques for nondestructive inspection of building and civil engineering structures = 紅外熱能圖像的開發及改善並應用於建築及土木結構工程的無損檢測的技術及評估 2009. xxi, 184 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2009. |
|
TA417.6 .K37 1998 |
Kashyap, Oruganti Ramkumar. Constitutive modelling for hot deformation : changing process conditions and dynamic recrystallisation [Hong Kong] : [Dept. of Manufacturing Engineering and Engineering Management], City University of Hong Kong, 1998. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1998. |
|
TA418.4 .C43 2002 |
Chan, Fanny Yuk Fan Influence of surface roughness measurement on wear mechanism [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2002. 117, [27] leaves : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2002. |
|
TA418.4 .L38 2001 |
Lau, Man-chun. Identification of wear mechanisms for physical vapor deposited TiN coating [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. iv, 202 leaves. : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
TA418.4 .W36 1999 |
Wang, Wen, Ph.D. Theoretical and experimental investigation of dynamic wear for partial elastohydrodynamic lubricated contacts = 部份膜彈流潤滑接觸動態磨損的理論和實驗硏究 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. 142, [6] leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 1999. |
|
TA418.7 .H68 1998 |
Hou, Kelvin Chi-cheun. A guideline for the selection of coordinate measuring techniques in reproduction of a wide range of sculptured surfaces [Hong Kong] : [Dept. of Manufacturing Engineering and Engineering Management], City University of Hong Kong, 1998. xii, 175 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1998. |
|
TA418.7 .N43 2004 |
Ngan, Chiu Chun. An auto-focusing microscope for surface inspection = 自動對焦表面檢測顯微鏡 2004. x, 89, [12] leaves : ill. (some col.) 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2004. |
|
TA418.7 .Y58 2008 |
Yiu, Ka Lok. Improvement of surface form accuracy through iterative corrections = 通過重複修正改善表面準確性的研究 2008. ix, 115 leaves : ill. (some col.) 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2008. |
|
TA418.76 .C45 2004 |
Chu, Kenneth. Effects of substrate bias voltages on mechanical and tribological properties of Ti-Al-N films prepared by reactive magnetron sputtering 2004. 58 leaves : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2004. |
|
TA418.76 .M325 2002 |
Ma, Hing Yin. Investigation on the tribological characteristics of some patterned PVD TiN coating = 氮化鈦鍍層表面摩擦性能的若干問題探討 2002. xviii, [167] leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2002. |
|
TA418.76 .S56 2005 |
Shum, Po Wan. Structure characterization and mechanical properties of industrial PVD-TiA1N coatings = 工業用 PVD-TiA1N 塗層的結構分析及其力學性能 2005. iii, viii, 175 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2005. |
|
TA418.9.C57 C44 2007 |
Cheung, Chun Kit. To Investigate the effect of surface coatings on the wear behaviour of the friction contact of ultrasonic motors = 表面塗層對超聲波電機摩擦界面上的磨損特性的影響 2007. xiii, 134 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2007. |
|
TA418.9.C57 C46 1999 |
Chow, Ka Lai. Literature survey on surface characterization of coatings and related experimental techniques Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
TA418.9.C57 L38 2006 |
Lau, Kin Ho. The effect of coating to substrate hardness ratio on the behaviour of coating failure caused by single pass scratch test = 塗層與底材的硬度比例在劃痕實驗中的機制 2006. xi, 98 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2006. |
|
TA418.9.T45 C58 2007 |
Chu, Kenneth. Studies of nanostructured Ti/TiB₂ and TiN/TiBN multilayer films = 納米結構 Ti/TiB₂ 及 TiN/TiBN 多層薄膜的研究 2007. xvi, 150 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2007. |
|
TA418.9.T45 H83 2003 |
Wong, Kin Man. The mechanical and tribological properties of C and CNx thin films = 碳和氮化碳薄膜的力學和摩擦性質的研究 2003. x, 92, [14] leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2003. |
|
TA418.9.T45 L38 2004 |
Lau, Cheuk Ming. Structural and mechanical properties of Ti-B-N nanocomposite films deposited by unbalanced reactive magnetron sputtering = 鈦硼氮納米復合薄膜的結構性和力學性質 2004. v, 55 leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2004. |
|
TA418.9.T45 X8 2009 |
Xu, Yufeng. Fabrication of nanocomposite Ti-Al-Si-N films deposited by reactive unbalanced magnetron sputtering and their properties-modification by high-energy carbon ion implantation = 非平衡磁控濺射沉積製造 Ti-Al-Si-N 納米結構薄膜並通過高能碳離子注入改進其性能 2009. 87 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2009. |
|
TA460 .S56 1997 |
Sing, Wu Man. A new approach for predictive modelling of sheet formability and one-step CAD/CAM of press tools for multiple-stage deep drawing Hong Kong : City University of Hong Kong, 1997. 1 vol. (various pagings) : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 1997. |
|
TA658.6 .Z38 2007 |
Zhu, Guohui. Concurrent approach to the shape design of plastic products = 并行方法設計塑膠產品之形狀 2007. xvii, 226 leaves : ill. (some col.) 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2007. |
|
TA1540 .N4 2007 |
Ng, Siu Pang. Development of a novel stressing method by means of thermal shock for non-destructive testing of large structures using shearography = 熱衝擊激光剪切干涉無損探傷法的發展及應用 2007. 120 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2007. |
|
TA1555 .L58 2010 |
Liu, Long. Further development of digital shearography for dynamic deformation measurement and nondestructive testing = 用於動態變形測量和無損檢測的數子剪切散斑干涉術的進一步開發 2010. xvi, 172 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2010. |
|
TA1570 .S53 2008 |
Sham, Fung Chu Janet. Studies of using infrared flash thermography (FT) for detection of surface cracks, subsurface defects and water-paths in building concrete structures = 閃光式熱影像的發展及於檢驗石屎表面裂縫, 內部缺陷及水軌跡的應用 2008. xix, 205 leaves : ill. (some col.) 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2008. |
|
TA1634 .C435 2008 |
Chen, Huiying. Towards optimal 3D visual tracking of rigid object motion based on depth information recovery = 基於恢復景深的最優化三維剛體視覺跟蹤 2008. vii, 115 leaves : ill. (some col.) 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2008. |
|
TA1634 .C44 2003 |
Chen, Shengyong. Active vision perception : sensor self-recalibration, automatic sensor placement, and 3D reconstruction = 主動機械視覺 : 感知器的自複標定, 自動取位, 及三維重建 2003. x, 232 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2003. |
|
TA1634 .C45 2001 |
Chow, Kin Hei. 3-D perception by machine vision = 機器視覺的三維感知 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. x, 88 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2001. |
|
TA1637 .K886 1999 |
Kwong, Chun-wai. 3D object model from stereo images with low cost frame grabber Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. 73, [13] leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
TA1637 .L5 1999 |
Li, Ning. Image segmentation based on encoder-segmented neural network (ESNN) and its application to MR brain images = 基於編碼, 分割神經網絡的圖像分割技術及其在大腦核磁共振圖片上的應用 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. vi, 126 leaves : ill. (some col.) 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1999. |
|
TA1637 .Z428 2006 |
Zhang, Beiwei. Dynamic calibration and 3D reconstruction via homographic matrix in a structured light system = 結構光系統中基於單應矩陣的動態標定和三維重建 2006. 149 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2006. |
|
TA1715 .L86 2010 |
Luo, Binhui. Preparation of hydrophobic surface on steel by patterning using laser ablation process = 使用激光刻蝕法提高不銹鋼表面的防水性能 2010. 2, 70 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2010. |
|
TA1815 .F86 1997 |
Fung, Marijana. Curvature sensor Hong Kong : City University of Hong Kong, 1997. iii, 113 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1997. |
|
TA1815 .H4 2004 |
He, Yuzhu. Theoretical analysis and experimental investigation of optical fiber curvature sensors = 光纖曲率傳感器的理論分析與實驗研究 2004. viii, 152 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2004. |
|
TA1815 .Z45 2005 |
Zhang, Rui. Experimental optimization of curvature sensors = 实验改进曲率传感器 2005. xii, 110 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2005. |
|
TD194.6 .L38 2003 |
Lau, Chung Wah. Web-base environmental performance evaluation and reporting system : simulation model 2003. xv, [214] leaves : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2003. |
|
TD194.6 .W65 2003 |
Wong, Ming Fung. Web-based environmental performance evaluating and reporting system 2003. 73, [48] leaves : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2003 |
|
TD194.68.H85 N425 2002 |
Ng, Benny Kar Lum. To develop an environmental impact assessment from the transportation and packaging stage of mobile phone in Hong Kong [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2002. 90 p. : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2002. |
|
TD195.E4 L5 2001 |
Li, Sum Keung. Review of the effectiveness of safety, health and environmental management systems implemented in CLP Power Generation Business Group = 中華電力發電業務部安全, 健康及環保管理系統之成效檢討 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. x, 75, [66] leaves : col. ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
TD195.F57 Y48 2001 |
Yeung, Man-yan. Environmentally friendly packaging for food transportation and storage [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. vi, 162 leaves. : col. ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
TD462 .O7 2001 |
Or, Chi-ming. Hygienic investigation of drinking water [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. ii, 134, [39] leaves. : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
TD746 .C435 1999 |
Cheung, Siu-hung. AI approach to fault diagnosis for wastewater treatment plant = 人工智能法應用於污水處理廠之故障診斷 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. xii, 139, 18 leaves. : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
TD789.C62 H664 2005e |
Lok, Wai Chuen. Development of a conceptual CIMOSA model of an integrated solid waste treatment system in Hong Kong = 香港固體廢物處理整體化系統的 CIMOSA 方案設計研究 2005. Thesis (M.Sc.)--City University of Hong Kong, 2005. |
|
TD839.H6 T76 1995 |
Tsoi, Lim Chung. A critical review of Hong Kong solid waste management strategy [Hong Kong] : City University of Hong Kong, Dept. of Manufacturing Engineering, 1995. viii, 67, 16 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995. |
|
TD883.1 .Y86 1995 |
Yung, Ching-hung. The design and development of a telemetry system for air pollution control and monitoring [Hong Kong] : Dept. of Manufacturing Engineering, City University of Hong Kong, 1995. 55, 17, xi, iv, ii leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995 |
|
TD883.17 .C45 2004 |
Chung, Keith Yik Kit. Indoor air quality of Hong Kong printing industry 2004. x, 282 leaves : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2004. |
|
TD883.17 .N45 2004 |
Ngai, Ho Kwong. Indoor air quality management guidelines for printing industry = 印刷業室內空氣管理指引 2004. 120 leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2004. |
|
TD883.17 .W67 2000 |
Wong, Kraven Wing-cheuk. Managing indoor air quality (IAQ) in a commercial building = 商業大廈之室內空氣質素管理 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2000. xi, 73 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
TD893.6.R3 C45 2002 |
Cheung, Ying Keung. Decision making in the design of sound barriers for rail traffic = 鐵路交通隔音屏障設計的方案 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2002. x, 138, [23] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
TE113.H85 S58 1996 |
Hsiao, Ching-ch'uan Computerized Civil Project Facilitator Hong Kong : City University of Hong Kong, 1996. x, 100, [16], 74 leaves : ill. 30 cm. Thesis (M.Sc.)--City university of Hong Kong, 1996. |
|
TE220 .L64 1996 |
Lok, Kim-wa. The adoption of customer-oriented approach in road improvement works Hong Kong : City University of Hong Kong, 1996. 82, [150] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TE220 .N53 1999 |
Ng, Muk-fai. The application of risk management process in maintenance activities for toll road/tunnel operations = 風險管理程序在收費道路/隧道營運中保養事務上之應用 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. xii, 117 leaves. : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
TE228 .N4 2007 |
Ng, Wai Yi. The usability of traffic signs = 交通標誌之可用性 2007. xiii, 197 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2007. |
|
TF200 .C45 2001 |
Choy, Sam Wai Sum. Continuous improvement : beyond ISO 9000 by partnering : re : quality management system for the Mass Transity Railway Tseng Kwan O extension works [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. iv, vi, 83, [55] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
TF241 .C43 1997 |
Chan, Chi-kit. Choosing the best railway maintenance facility expansion option using the analytic hierarchy process Hong Kong : City University of Hong Kong, 1997. vi, 60 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
TF270 .L48 1997 |
Leung, Dorian. Risk management to railway structures of Mass Transit Railway Corporation Hong Kong : City University of Hong Kong, 1997. ix, 70, 31 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
TF530 .A9 1996 |
Au, Kwok-wah Billy Optimizing the operation cost of passenger trains heavy maintenance Hong Kong : City University of Hong Kong, 1996. vii, 60 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TF530 .C48 1993 |
Chu, Yee-ming. Design a station-based maintenance system for the Lantau Airport Railway [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1993. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
TF530 .L34 1998 |
Lai, Terry Chi-keung. Optimization of the maintenance intervals of the MTRC passenger trains Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1998. x, [144] leaves : ill. 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998 |
|
TF617 .T35 1996 |
Tam, Wai-cheong. EMU signalling equipment fault diagnosis by using expert system Hong Kong : City University of Hong Kong, 1996. 78, [34] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TF673 .L48 1997 |
Leung, Hip Kan. Reliability centered maintenance for light rail vehicle equipment Hong Kong : City University of Hong Kong, 1997. viii, 59, [31] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
TF813.H85 C43 1993 |
Chan, Tak-sun, Dickson. Improving light rail rolling stock maintenance operation [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1993. xi, 89, [30] leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
TF845 .L38 2000 |
Lau, Santa K. Y. A heterarchical distributed control platform for real-time flap gate control in mass transportation system = 批量傳送系統實時翼門控制的一個異構分佈控制平台 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong. |
|
TF847.H6 H625 1996 |
Ho, Jung-chiu A management information system for rolling stocks shop floor maintenance Hong Kong : City University of Hong Kong, 1996. vi, 119 leaves : ill. 30 cm. Thesis (M.Sc.)--City university of Hong Kong, 1996. |
|
TF847.H6 L48 1994 |
Leung, Yu-hing, Michael. The application of risk management process to project appraisal in Rolling Stock Section of MTRC [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1994. xi, 111, 16 leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1994 |
|
TF847.H6 N4 1994 |
Ng, Wing-hong. A framework for implementing total quality management, Hong Kong Mass Transit Railway Corporation [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1994. viii, 106, 29 leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1994 |
|
TH113.H85 C45 2001 |
Chow, Dicky Wai Man. Performance evaluation on the re-organization of Buildings Department = 屋宇署改組後的工作表現評估 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. viii, 61, 4 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
TH425 .C48 1993 |
Chui, Mow-wah, Gregory. Contract strategy for Building Services Branch of Architectural Services Department [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1993. vii, 85, 22 leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
TH435 .M64 1994 |
Mok, Chung-keung. The application of risk management process (RMP) in building services cost estimation [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1994. viii, 97 [47] leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1994. |
|
TH438 .C453 2002 |
Choi, Tse-wing. A study of the ISO 9000 implementation in Hong Kong construction industry = 在香港建造業實踐 ISO 9000 之研究 2002. viii, 112, [60] leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2002. |
|
TH438 .H6 2001 |
Ho, Johnny Chi Lai. Development of subcontracting management control system for a construction firm in Hong Kong = 香港建築商之分判管理控制系統發展 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. vii, 84 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
TH438 .L395 1999 |
Lee, Moon-tong. Variation orders and claims management in infrastructure construction contracts : a consulting engineer's perspective = 基礎建設工程合約之工程變更和索賠管理 : 顧問工程師的見解 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. ix, 63, [43] leaves. : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
TH438.2 .C43 2002 |
Chan, Chi Fat. Employee involvement in ISO 9000 quality system for Gammon Construction Limited : new quality model for construction projects = 金門建築有限公司之員工投入於 ISO 9000 的品質管理制度 : 建築工程之新品質模式 2002. 79, [38] leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
TH443 .C39 2001 |
Chan, Pete Kin Sang. A benchmarking study of construction safety in Hong Kong [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. xv, 115 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
TH443 .K86 1998 |
Kwok, Wai-yin. Improving construction safety and health in the light of British Standard 8800 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1998. 98 leaves : ill. 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
TH900 .S55 1997 |
Shum, Chung-yiu. Builders' lifts and tower working platforms safety management in Hong Kong Hong Kong : City University of Hong Kong, 1997. x, 56, [9] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
TH5281 .L35 2003 |
Lai, Wai Ming. Analysis of scaffolding systems for construction industry = 分析建造業之鷹架系統 2003. 190 leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2003. |
|
TH7015 .T66 2000 |
Tong, Samuel Yiu-wing. The use of front-end maintenance analysis on the optimisation of maintenance for air handling units [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2000. xi, 98 leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
TH9705 .T35 2000 |
Tam, Wai-cheong. Computerized cost estimation of security system installation for building construction projects = 安裝保安設備的自動化估價 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong. |
|
TJ163.3 .C47 2000 |
Chu, Peter Ka-leung. Review of electricity consumption management for a typical shopping arcade = 典型商場電能節約檢討 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2000. viii, 66 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
TJ163.4.H6 C42 1998 |
Chan, Perry Shui-ching. A global review of energy efficiency labelling schemes & a Hong Kong experience Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1998. x, 106 leaves : ill. 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
TJ163.4.H6 L34 2001 |
Lai, Godwin Kwok-wing. Energy saving performance contracting with existence of a third-party arbitrator in commercial sector in Hong Kong = 有第三者仲裁之香港商業節能績效合約 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. 81, [3] leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
TJ184 .W36 1999 |
Wang, Yong, Ph.D. Dynamic modelling of flexible geared multi-body systems : a finite element approach [Hong Kong] : [Dept. of Manufacturing Engineering and Engineering Management], City University of Hong Kong, 1999. xiii, 196 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 1999. |
|
TJ211 .C47 2001 |
Chan, Ka-wing. An automatic test equipment for evaluating the sealing system of a cleaning robot [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. iii, 81 leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
TJ211 .H83 2008 |
Huang, Haibo, Ph. D. Towards automatic batch biomanipulation : study on robotic suspended cell injection system = 面向大批量自動化生物製造的機械懸浮細胞注射系統研究 2008. x, 121 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2008. |
|
TJ211 .N49 2002 |
Ng, Albert Bing. A safety-support unit for a curtain wall cleaning robot = 幕墻淸潔機械人安全支援系統 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2002. 1 v. (various pagings) : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
TJ211 .Y57 2004 |
Yip, Laurence Kin Wa. Web-based tele-operation of Internet-accessible devices = 網際遙距操作互聯網可啟動儀器 2004. viii, 119 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2004. |
|
TJ211.35 .C45 2009 |
Chen, Jian. Multi-robot formation control : a receding-horizon leader-follower framework = 多机器人的阵型控制设计 : 一种融合 leader-follower 与 receding-horizon 的方法 2009. viii, 114 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2009. |
|
TJ211.35 .C46 2002 |
Chow, Wing-leung. Servo-control of long-stroke pneumatic cylinders with on/off valves for service robot application = 應用於服務型機器人之開關式氣壓閥的長行程氣壓缸伺服控制 2002. xiii, 118 leaves : ill. (some col.) 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2002. |
|
TJ211.35 .H83 2003 |
Wong, Kwok Sing. Sensing tactics and performance evaluation for a flexible robot arm = 彈性機械臂的感應策略及效能評値 2003. vii, 97 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2003. |
|
TJ211.35 .W35 2009 |
Wang, Can, Ph. D. Formation control of multiple robot systems with motion synchronization concept = 多機器人系統的組隊同步控制研究 2009. x, 91, [15] leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2009. |
|
TJ211.415 .C43 1998 |
Chee, Bing Yung Mobile robot area filling [Hong Kong] : [Dept. of Manufacturing Engineering and Engineering Management], City University of Hong Kong, 1998. x, 123 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1998. |
|
TJ211.415 .C45 2009 |
Chen, Haoyao. Towards multi-robot formations : study on vision-based localization system = 面向多機器人編隊的基於視覺的定位系統研究 2009. ix, 112 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2009. |
|
TJ211.415 .L58 2010 |
Liu, Shuang, Ph. D. Motion planning of multiple mobile robots in formations = 多機器人編隊的運動規劃 2010. viii, 85 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2010. |
|
TJ211.45 .L58 2002 |
Liu, King Pui. Two-arm service robot programming through automatic capturing of human skill and intention as demonstrated by hand motion = 服務機器人依據手部動作自動編程 2002. xv, 143 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2002. |
|
TJ214.5 .C43 2007 |
Chan, Wing Hong, Ph. D. A comprehensive study of movement compatibility on common control-display configurations = 常用控制器與顯示器移動匹配關係的綜合性研究 2007. xvi, 178 leaves : ill. (some col.) 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2007. |
|
TJ214.5 .S53 2006 |
Shao, Xiao Yin. Development of new motion control architecture with FPGA-based IC design = 基於 FPGA 的 IC 設計及運動控制新架構之研究 2006. ix, 130 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2006. |
|
TJ217 .L5 2007 |
Li, Xiaodong. Learning control of uncertain dynamical systems with specified iterative initial conditions = 特定迭代初始條件下不確定動態系統的學習控制 2007. vi, 119 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2007. |
|
TJ217.2 .C485 2006 |
Chen, Cailian. Delay-dependent robust control for nonlinear time-delay systems : analysis, synthesis, and application = 非綫性時滯系統的時滯相關魯棒控制 : 分析, 綜合及應用 2006. xiii, 226 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2006. |
|
TJ217.2 .L8 2010 |
Lu, Xinjiang. Model based robust design and its integration with control = 基於模型的魯棒設計及它與控制的整合 2010. xiv, 176 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2010. |
|
TJ217.2 .Q25 2009 |
Qiu, Jianbin. New approaches to robust filtering design for uncertain dynamical systems with time delay = 不確定動態時滯系統的魯棒濾波設計新方法 2009. xi, 209 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2009. |
|
TJ217.5 .M33 1999 |
Ma, Kee-yiu. Simulation for a robotic machining workstation [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. x, 183 leaves. : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
TJ223.T4 K96 1998 |
Kwong, Kin Wai. The application of fuzzy logic control on snap cure oven Hong Kong : City University of Hong Kong, 1998. xii, 115 leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
TJ1063 .L38 2009 |
Lau, Hoi Yam. Feasibility of using giant magnetostrictive material (GMM) based actuators in active control of journal bearing system = 超磁致伸縮物料傳動器於油膜軸承作主動控制功能之可行性研究 2009. xix, 182 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2009. |
|
TJ1063 .W66 2007 |
Wong, Tsui Hang. The wear performance of journal bearing used in high speed applications = 高速應用條件下徑向軸承的磨損行為 2007. xiii, 136 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2007. |
|
TJ1075 .C45 1999 |
Chan, Chi-wa, M.Phil. Tribological performances under various slide-to-roll ratios running conditions = 不同滑滾比例及運作條件下之摩擦特性 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. 95 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1999. |
|
TJ1075 .C47 2003 |
Chan, Chun Yip. Machine development for tribology : load applying and friction measuring system 2003. 78 leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2003 |
|
TJ1075 .C58 2004 |
Chow, Wai Yip. Machine development for tribological testing 2004. 100 leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2004. |
|
TJ1075 .G86 2003 |
Guo, Feng. Investigation on non-conventional elastohydrodynamic lubrication films = 非經典彈性流體動力潤滑油膜之研究 2003. xi, 166 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2003. |
|
TJ1075 .H74 2003 |
Hung, Wai Ping. Machine development for tribology : driving system 2003. 97 leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2003 |
|
TJ1075 .L34 2003 |
Lam, Man Chung. Tribological evaluation using energy pulse approach 2003. v, 78 leaves : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2003 |
|
TJ1075 .L53 2003 |
Leung, Wai Cheong. A study of the tribological effects of magneto-rheological suspensions on boundary lubricated contacts = 磁流變液之摩擦學特性研究 2003. xv, 152 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2003. |
|
TJ1075 .L68 2007 |
Louie, Yuen Tung. An investigation of tribological characteristics of an electromechanical system = 機電系統的摩擦特性研究 2007. xvi, 149 leaves : ill. (some col.) 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2007. |
|
TJ1075 .S59 2000 |
Siu, Jaffee Hok-wai. An investigation of the effect of surface roughness and coating thickness on the tribological behaviour of steel surfaces coated with MoS₂/metal composite coating = 表面粗糙度及 MoS2 [Hong Kong] : Dept. of Manufacturing Engineeering and Engineering Management, City University of Hong Kong, 2000. xiv, 114 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2000. |
|
TJ1077 .L38 2004 |
Lau, Tracy Chuck Chi. Evaluation of the performance of different lubricants for deep drawing and ring compression of aluminum, brass and steel = 不同的潤滑劑塗於鋁質物料, 黃銅物料和鋼物料經過深沖和圓環壓縮的表現評估 2004. 143 leaves : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2004. |
|
TJ1185 .C45 2005 |
Cheng, Man Kit. Development of an autonomous cutting force data acquisition and prediction system for CNC turning = 數控機床車削力預測整合系統 2005. xvii, [246] leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2005. |
|
TJ1185 .K45 1999 |
Kharkevich, Alexandr Gennadievich. Basic geometric analysis of 3-D chip curl for chip control in machining = 加工切屑控制中三維卷屑的基本幾何分析. [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. xviii, 171 leaves : ill. (some col.) 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 1999. |
|
TJ1185 .L58 1999 |
Liu, Zhan-qiang. Error compensation in CNC turning from dimensional measurements of previously machined parts = 計算機數控機床車削加工工件的測試與加工誤差補償 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. 1 v. (various pagings) : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 1999. |
|
TJ1185 .M223 2002 |
Ma, Lok Sang. Optimization of tool-path in two-dimensional cutting with manufacturing constraints involving arbitrary patterns and layouts = 不定形零件之加工佈局限制下的二維切削軌優化研究 2002. xiii, [141] leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2002. |
|
TJ1189 .L35 2006 |
Lam, Chi Ming. Development of a hybrid control system using NURBS interpolator and cross-coupling approach to eliminate contour error : theory and application = 基於 NURBS 差補器與交叉耦合方法的輪廓誤差混合控制系統 : 理論與應用 2006. ix, 96 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2006. |
|
TJ1189 .L5 2001 |
Li, Sung Tak. An automation system of CNC integrated turret punch and plasma cutting machine for sheet metal forming [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. 63 leaves : col. ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
TJ1189 .N435 2008 |
Ng, Yu Ki. A new velocity profile generation for high efficiency CNC machining application = 用於高效率數控機床的新型速度曲線的產生方法 2008. ix, 72 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2008. |
|
TJ1189 .N44 1998 |
Ngan, Wai-kwan. Geometric accuracy of machining Hong Kong : City University of Hong Kong, 1998. 55, [130] leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 1998. |
|
TJ1189 .T66 2006 |
Tong, Ming Chau. Modeling and cross-coupled contouring control of multi-axis CNC machine tools = 多軸數控機床的建模和交叉耦合式軌跡控制之研究 2006. x, 94 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2006. |
|
TJ1225 .C45 1999 |
Chung, Ki-tung A multisensor approach to the monitoring of machining processes = 銑過程監察之多元傳感器方法硏究 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1999. |
|
TJ1225 .I6 2001 |
Ip, Chi-kit. Behavior modeling for the virtual prototyping of a 3-axis milling machine [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. ivi, 293 leaves. : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
TJ1230 .L6 1998 |
Lo, Hon-wing. A general model for the preliminary design and selection of cutting tool geometry [Hong Kong] : [Dept. of Manufacturing Engineering and Engineering Management], City University of Hong Kong, 1998. xiv, 112, [20] leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1998. |
|
TJ1280 .L85 1997 |
Lui, Osmond Chi-Hang. Preliminary studies of applying robot for mold polishing Hong Kong : City University of Hong Kong, 1997. x, 159 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1997. |
|
TJ1317 .H36 2002 |
Han, Liang. Sensor-based flexible vibratory feeding system for agile manufacturing = 適於敏捷製造基於傳感器的柔性振動送料系統 2002. xxi, 212 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2002. |
|
TJ1317 .W66 1992 |
Wong, Francis Seung Yin. Automated geometric feature recognition : an essential component for automated design for assembly Hong Kong : [Dept. of Manufacturing Engineering], City Polytechnic of Hong Kong, 1992. vi, 132 leaves : ill. 30 cm. Thesis (M.Phil.)--City Polytechnic of Hong Kong, 1992 |
|
TJ1376 .L44 2000 |
Lee, Ka-chun. Study of the effectiveness of ISO 9001 certification in escalator installation process = 在扶手電梯安裝過程中, ISO 9001 證書的有效性硏究 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. ix, 84, 13 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong. |
|
TK152 .H84 1995 |
Hui, Ming-chi. Strategic recommendations for improving power utility safety management [Hong Kong] : Dept. of Manufacturing Engineering, City University of Hong Kong, 1995. viii, 65, [13] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995. |
|
TK399 .Y35 1999 |
Yam, Chris Wai-ming. Development of automatic remote utility meter readout system = 遙距自動讀表系統 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. vi, 48 leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong. |
|
TK454.4.M3 C45 2010 |
Chow, Tsz Chun Samuel. Experimental study on stabilizing range extension of diamagnetic levitation under modulated magnetic field = 磁場調控對擴大反磁性穩定懸浮範圍的實驗研究 2010. xxiii, 256 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2010. |
|
TK1005 .M64 1998 |
Mok, Shui-ping. Feasibility study of implementing integrated protection and control systems for China Light and Power Co. Ltd. Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, [1998] x, [151] leaves : ill. 31 cm. Thesis (M.Sc.)--City University of Hong Kong, [1998] |
|
TK1193.H6 C45 2001 |
Chan, Wing Tong. Risk management in cable trench construction projects for CLP Power = 中華電力壕坑建設計劃之風險管理 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. xii, 84, [27] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
TK1193.H6 C58 1999 |
Chow, Man-fai. To develop an effectiveness-centred maintenance approach for improving maintenance management of radio unit in power company = 展硏實效為本保養以改善電力公司內無線電組之維修管理 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. xi, 119 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
TK1193.H6 M3 1996 |
Ma, Chun-fai. Improving the district planning sections in CLP Hong Kong : City University of Hong Kong, 1996. viii, 66 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TK1193.H6 M64 2001 |
Mok, Kwok Wah. Risk management model for maintenance of electricity supply network = 供電系統保養工作的風險管理模式 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. xi, 90 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
TK1193.H6 W36 1996 |
Wan, Siu-kai. Management of change at power station Hong Kong : City University of Hong Kong, 1996. viii, 138 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TK1751 .Y8 1996 |
Yu, Chin-kuen. Managing project schedule risks for an EHV substation construction project with expert systems Hong Kong : City University of Hong Kong, 1996. x, 100, [10] leaves (5 folded) : ill., map 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TK2896 .L36 2008 |
Lam, Cheuk Yi. A novel design in harvesting energy from operating machines by converting their generated waste energies to electricity = 從運行機器中提取廢棄能量而轉化成有用的電力之嶄新設計 2008. xiv, 127 leaves : col. ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2008. |
|
TK2945.N52 L84 2001 |
Lui, Michael Hok Leung. Collection and recycling of Nickel-Cadmium (Ni-Cd) battery in Hong Kong = 鎳鎘電池在香港的收集及再造 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. x, 70 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
TK3001 .M34 1995 |
Mak, Chi-leung. Risk management to improve transmission operations and maintenance actities [i.e. activities] [Hong Kong] : Dept. of Manufacturing Engineering, City University of Hong Kong, 1995. xii, 129 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995. |
|
TK3091 .A9 1993 |
Au, Ting-hon, Paul. The development of quality management system in district organisation for distribution of electricity Hong Kong : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1993. ix, 158 leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
TK3091 .B87 1993 |
Burchett, John Frank. Risk management in transmission construction projects [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1993. xiii, 112, [63] leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
TK3091 .H63 1995 |
Ho, Sik Fai. Improving planned distribution outage processes in CLP [Hong Kong] : City University of Hong Kong, Dept. of Manufacturing Engineering, 1995. vii, 68 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995. |
|
TK3091 .H86 2000 |
Hung, Chi-kwong. Enhancement of the current time-based preventive maintenance in CLP power by using neural network based prognostic system = 利用神經網絡中的預測故障能力系統來加強中電現用的定時維修保養系統 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. 113 leaves : col. ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
TK3091 .L45 1994 |
Lee, Yuk-wah, Victor. Improving the outage process for CLP distribution networks [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1994. x, 74, [21] leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1994 |
|
TK3091 .L48 1995 |
Leung, Hok Man. Improving the new customer connections process in CLP [Hong Kong] : City University of Hong Kong, Dept. of Manufacturing Engineering, 1995. ix, 100 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995. |
|
TK3091 .L63 1999 |
Lo, Pak-cheong. A maintenance strategy optimization model for the transmission system of CLP = 中電輸電系統的維護策略優選模型 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. ix, 108 leaves. : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
TK3091 .L64 2000 |
Lok, Chi-ming. Reliability and maintenance study of power distribution network in CLP power = 中華電力配電綱 [i.e. 網] 絡可靠度及其維修保養管理之實硏 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. xi, 106, [39] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
TK3091 .W66 1998 |
Wong, Tang-wai. Short term load forecasting by using artificial neural network Hong Kong : City University of Hong Kong, 1998. vi, 70 leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 1998. |
|
TK3211 .M64 1996 |
Mok, Siu-kin. A WWW homepage for the Gas Standards Office Hong Kong : City University of Hong Kong, 1996. 90, 16 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TK5102.5 .L486 1998 |
Leung, Wing Tong. The design and development of an engineering record system for provisioning and monitoring in a telecommunication company Hong Kong : City University of Hong Kong, 1998. viii, 102, [19] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
TK5102.5 .T335 1996 |
Tam, Chiu-yun Maggie. An application of the analytic hierarchy process in vendor selection of a telecommunications system Hong Kong : City University of Hong Kong, 1996. vi, 73, [30] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TK5102.92 .C43 2009 |
Chan, Chi Ho. Empirical mode decomposition based novel data compression algorithm for wireless data transmission in machine health monitoring = 基於經驗模態分解 (EMD) 的用於設備健康監測中傳送無線數據的新型數據壓縮算法 2009. xii, 149 leaves : ill. (some col.) 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2009. |
|
TK5103 .L35 2000 |
Lam, Fred Wing-chak. A framework for formulating maintenance strategy = 釐定維修策略的構架 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, 2000. xii, 107 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
TK5103.2 .Y325 2009 |
Yang, Bo, Ph. D. Competition, cooperation and cognition in wireless resource allocation = 無線資源分配中的競爭, 合作與認知 2009. 9, ii, 154 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2009. |
|
TK5105 .W65 1994 |
Wong, Din-tat. Development of strategies for the implementation of ISO 9001 for Hongkong Telecom digital data services [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1994. v, 116, [21] leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1994 |
|
TK5105.5 .P66 1993 |
Pong, Tin-lun. Success factors for project management for computer network systems development in an international company Hong Kong : City Polytechnic of Hong Kong, Dept. of Manufacturing Engineering, 1993. viii, 135 leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
TK5105.5 .Y49 2004 |
Ye, Zhipin. Network traffic modeling and queueing analysis based on α-stable self-similar processes = 基於 α 穩態自相似過程的網路流量建模及其排隊分析 2004. xiii, 125 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2004. |
|
TK5105.875.I57 K88 2000 |
Kwok, Simon Shu-ki. Studies on adoption and development of internet and E-commerce in Hong Kong = Xianggang hu lian wang ji dian zi shang mao zhi cai na ji fa zhan yan jiu = 香港互聯網及電子商貿之採納及發展硏究 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2000. viii, 146, 3 leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
TK5105.882 .S6 2001 |
So, Sai-hung. Development of an internet CAD browser using JAVA and OpenGL [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. 69 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
TK5105.8865 .C45 2001 |
Chan, Chun Tak. An operational system model for an international switching center = 國際電訊網絡交換中心運作模型 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. viii, 72 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
TK6570.M6 C44 1997 |
Cheung, Kenny Wai Kuen. Wireless communications : a strategic review of the cellular radio system in Hong Kong Hong Kong : City University of Hong Kong, 1997. ix, 78 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
TK6570.M6 L45 2004 |
Li, Chik Kuen. Environmental performance assessment model for mobile phone : fuzzy logic approach = 流動電話對環境影響評估模型 : 模糊邏輯方法 2004. xi, 179 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2004. |
|
TK6570.M6 W65 2002 |
Wong, Hoi Ying. Life cycle assessment of mobile phones in Hong Kong : using and disposal [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2002. 78 leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2002. |
|
TK6677 .T74 1995 |
Tsang, Kwok-lung, Vincent. Activity based costing of satellite television receiving systems [Hong Kong] : Dept. of Manufacturing Engineering, City University of Hong Kong, 1995. vii, 58 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995. |
|
TK6679.3 .C43 1998 |
Chan, Wai-piu. Designing and improving the multimedia graphical user interface for interactive television service = 設計及改進多媒體互動電視用戶介面 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1998. x, 225 leaves. : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
TK7836 .C44 2002 |
Cheung, Steve Kwok Ping Effect of bonding parameters on ultrasonic aluminum wedge bonding with process optimization [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2002. v, viii, 73 leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2002. |
|
TK7836 .L5 1997 |
Li, Kam Tong. Operations improvement for the Technical Engineering Department of an electronics manufacturer Hong Kong : City University of Hong Kong, 1997. viii, 49, [14] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
TK7836 .Y83 1996 |
Yuen, Yin-mun. Competitive strategies for a small electronic manufacturing firm Hong Kong : City University of Hong Kong, 1996. viii, 74 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TK7868.P7 C45 2001 |
Chan, Pakin Pak-kan. Online PCB CAPP system [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. vii, 134 leaves. : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
TK7868.P7 L35 2000 |
Lam, Yung-pang. Application of demand flow technology for a printed circuit board company = 電路版公司使用流水作業生產技術 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2000. ix, 81 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
TK7868.P7 N44 1998 |
Ng, Sung Hing. Direct material tracking using bar code technology in printed circuit board industry Hong Kong : City University of Hong Kong, 1998. vii, 72, [35] leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
TK7868.P7 P28 2002 |
Pang, Yuk Wa. Optimization of pick and place sequence in SMT machine = 表面銲接元件貼片機的拾放行程優化 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2002. vi, 76 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
TK7868.P7 S53 1996 |
Shek, Kwai-wah. Knowledge-based maintenance diagnostic tool for surface mount equipment Hong Kong : City University of Hong Kong, 1996. xi, 96, xxviii, iii leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TK7868.P7 W66 2001 |
Wong, Chi-kong. A case-based reasoning system for solder defect diagnostics [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. vi, 172 leaves. : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
TK7870 .C44 1996 |
Chan, Chi-kin, M.Sc. An investigation on the application of A.I. in leadframe handling mechanism design Hong Kong : City University of Hong Kong, 1996. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TK7870 .Y825 1999 |
Yu, Alex Lun-fai. Re-design a soft-touch sensor Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. 254, 4, 8 leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
TK7870.17 .T75 2002 |
Tse, Wang Lung. A systematic engineering approach to the "singulation process" analysis (semiconductor industry) = 應用系統工程方法於半導體行業中分離步驟之硏究 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2002. 98 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
TK7874 .C393 2000 |
Chan, Kwok-on. Experimental design on dispensing process of die bonder in semiconductor industry Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. [xiii], 68, [7] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong. |
|
TK7874 .D45 2005 |
Deng, Hua. Hybrid spectral/intelligent modeling, control and diagnosis for nonlinear distributed curing processes = 基於譜方法的非線性分佈參數固化過程智能建模, 控制及診斷 2005. ix, 183 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2005. |
|
TK7874 .P66 1999 |
Poon, Rayman Kai-man. A study of the epoxy die bonding process for a newly developed automatic die bonder [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. xi, 120 leaves. : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
TK7874 .W655 2002 |
Wong, Ho Chi. Dynamic analysis and improvement of a class of non-linear mechanism with application in die attachment = 動態分析及設計改進非線性機械之晶片附送系統 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2002. 92 leaves : ill. 30 cm. + 1 CD-ROM (4 3/4 in.) Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
TK7874 .Y48 2003 |
Yeung, Koon Sung. Implementation of fuzzy logic control for epoxy dispensing system = 滴膠系統的模糊控制及應用 2003. ix, 81 leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2003. |
|
TK7881.9 .T86 1999 |
Tung, Kwok-wa. Application of intelligent voice control for public address system = 利用智能控制的廣播系統 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. 1 v. (various pagings) : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
TK7882.I6 S6 2009 |
So, Chung Yin. The effects of different design factors on comprehension performance and subjective evaluation for reading Chinese on LED display = 不同顯示方式對發光二極管電子顯示屏之中文閱讀表現及影響 2009. x, 118 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2009. |
|
TK7882.P3 Y83 1999 |
Yuen, Cheuk-fai. Coping with the complexity and infinite variety of geometric features : a cooperative geometric feature recognition system = 處理幾何特徵之無限及複雜性 : 具合作能力之幾何認徵系統 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. xiv, 247 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 1999. |
|
TK7882.W44 L84 1995 |
Lui, Hing-wa. Design and implementation of an automatic weighing and packaging control system Hong Kong : City University of Hong Kong, 1995. x, 90, xlvii, 36 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TK7895.A8 C44 1996 |
Cheung, Wai-keung. LTX77 automatic text equipment simulator Hong Kong : City University of Hong Kong, 1996. 65, [80] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TK7895.S62 W35 1999 |
Wai, She-hong. Customer satisfaction of using Octopus Card = 顧客使用八達通卡之滿意程度 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. ix, 88 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
TL175 .C435 1998 |
Cheng, Wai-tat. Automatic truck parks registration system = 貨車泊位自動監察系統 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1998. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
TL242 .Y83 2001 |
Yuen, Kelvin Ho-cheong. Introduction of a new legislative framework to enhance the safety design standard on new vehicle = 引進一組新的立法大綱以提高新車的安全標準 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. xiv, 114 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
TL570 .H86 2004 |
Hung, Ling Che. Micro air vehicle : design, test, analysis and fabrication 2004. 143 leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2004. |
|
TL720 .T36 1994 |
Tang, Hor Loon. Condition-based maintenance at Hactl's new air cargo terminal at Check Lap Kok [Hong Kong] : City University of Hong Kong, Dept. of Manufacturing Engineering, 1994. vi, 66, [21], leaves, 21 p., 1 folded plan : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1994. |
|
TL725.3.T7 C43 2008 |
Chan, Wai To. Study of influential factors on knowledge sharing and its effect on performance in air traffic control system maintenance = 影響知識分享因子與知識分享對空中交通管制系統維修表現關係的探索 2008. ix, 217 leaves : ill. 30 cm. Thesis (Eng.D.)--City University of Hong Kong, 2008. |
|
TP1150 .C44 1998 |
Cheung, Wai Tong. Scheduling and monitoring of plastics injection shopfloor using petri nets modeling Hong Kong : City University of Hong Kong, 1998. viii, 155, 43 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
TP1150 .L44 2008 |
Lee, Yun Hei Eugene. Intelligent CAD/CAM tools for mold insert and EDM electrode design = 智能化 CAD/CAM 模具鑲件及 EDM 電極設計工具 2008. ix, 114 leaves : col. ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2008. |
|
TP1150 .L5 2009 |
Li, Chunguang. Intelligent CAD for plastic injection mould cooling system design : a graph searching technique and configuaration space methods = 塑膠模具冷卻系統的智能化計算機輔助設計 : 圖搜索技術和配置空間方法 2009. 147 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2009. |
|
TP1150 .L84 1996 |
Lui, Siu-kan Boris Application of generic pattern matching in cooling system design for plastic injection mould Hong Kong : City University of Hong Kong, 1996. xiii, 177 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TP1150 .M56 1996 |
Mok, Chiu-kam A CAD-integrated "knowledge-based system" for mold design in injection molding processes Hong Kong : City University of Hong Kong, 1996. vi, 130 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1996. |
|
TP1150 .S53 1996 |
Shea, Hong-kwok Rupert. Towards plastics injection-molding process-diagnosis with fuzzy petri net rule based system Hong Kong : City University of Hong Kong, 1996. 163, [24] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TP1150 .T66 1994 |
Tong, Shui-yuk. A procedural cost estimation strategy for plastic injection moulds [Hong Kong] : Dept. of Manufacturing Engineering, City University of Hong Kong, 1994. xiv, 140 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995 |
|
TP1150 .T67 2000 |
Tong, Sherman Suet-man. A framework for an injection mold design system using CBR approach Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. 147 leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
TP1175.S6 S825 2003 |
So, Shing Chuen. Development of powder coating process in stationery manufacture industry = 開拓噴粉表面處理於文具製造工業 2003. ix, 88, [40] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2003. |
|
TR860 .L44 2003 |
Lee, Kam Ki. Adopting "Panoramic Digital Video" (PDV) techniques for the new generation of cinematography 2003. ix, 87 leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2003 |
|
TS155 .C4523 2003 |
Cheung, Ching Ching. Conflict management in product development process : a comparative study of practices in Hong Kong, Shanghai and Singapore = 産品開發過程中的衝突管理 : 香港, 上海及新加坡三地的研究 2003. xii, 233 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2003. |
|
TS155 .L363 2005 |
Lau, Ka Wing. The impact of product modularity and supply chain integration on product performance = 產品模塊化及供應鏈整合對產品表現的影響 2005. ix, 247 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2005. |
|
TS155 .L428 1996 |
Lee, Ka-wing. The development of a decision support system for the elimination of project delay Hong Kong : City University of Hong Kong, 1996. vi, 79, [36] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TS155 .S93 1998 |
Suen, Ka-po. Improving the manufacturing performance of SB plants through benchmarking Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1998. vii, 38 leaves : ill. 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
TS155 .W57 2004e |
Wo, Kin Kuen. Production planning and control of semiconductor manufacturing industry in Hong Kong = 香港半導體業之生產計劃及控制 2004. Thesis (M.A.)--City University of Hong Kong, 2004. |
|
TS155.6 .C43 1998 |
Chan, Tung Fai. Adaptive slicing of CAD models for rapid prototyping Hong Kong : City University of Hong Kong, 1998. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
TS155.6 .S58 2001 |
Siu, Danny Ka-yue. Development of the information system for the production machines = 建造生產機器的數據收集系統 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. 1 v. (various pagings) : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
TS155.6 .T36 2005 |
Tang, Huiliang. Development of a three dimensional copier system using shadow Moiré and rapid prototyping technology = 運用陰影云紋法實現三維立體影印技術 2005. ix, 80 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2005. |
|
TS155.63 .C44 1998 |
Cheung, Anthony Yuet-keung. Integration of 80 leads TQFP front-line assembly processes Hong Kong : City University of Hong Kong, 1998. x, 100 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
TS155.63 .L34 2001 |
Lai, King Kit. Application of CIM concept to increase the competitiveness of a global enterprise = 應用電腦整合製造槪念以提升企業競爭力 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. ix, 100, [21] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
TS155.63 .L58 2000 |
Liu, Shoubin. Automatic segmentation of 3-D surfaces and features from CT-contour data for CAD modelling = CT 輪廓數據的三維表面和表面特徵的自動分割及其在 CAD 建模中的應用 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. viii, 145 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2000. |
|
TS155.63 .L8 2000 |
Lu, Zhengkang. A contribution to object oriented modelling of fuzzy and temporal information in manufacturing database design = 製造數據庫設計中模糊和時序信息的面向對象建模方法的硏究 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. ix, 187 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2000. |
|
TS155.63 .T35 2001 |
Tang, Wing-ho. Product development using digital manufacturing approach [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. vi, 147 leaves. : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
TS155.65 .K48 1997 |
Keung, Chi Kong. Safety system for flexible manufacturing environment : impact on productivity Hong Kong : City University of Hong Kong, 1997. vii, 82 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
TS155.65 .N45 1998 |
Ng, Hok-chuen. A Holonic shop floor control framework for flexible manufacturing systems [Hong Kong] : [Dept. of Manufacturing Engineering and Engineering Management], City University of Hong Kong, 1998. x, 182 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1998. |
|
TS155.8 .W66 2002 |
Wong, Jeremy Chun Ming. Development of an exercise in team working and cellular operation [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2002. viii, 59, 89 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
TS156 .C27 2003 |
Tsai, Joyce Yau Ching. A hybrid quality function deployment (HQFD) framework for new product development = 品質機能展開法在新産品發展的框架研究 2003. ix, 106 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2003. |
|
TS156 .C4235 2000 |
Chan, Edmond Cheuk-man. Quality function deployment implementation framework for Beautiful Enterprise = 標華豊企業之 QFD 執行模型 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2000. 107 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
TS156 .K86 1995 |
Kwok, Ka-yin. Total control methodology (TCM) : integration of isolated quality tools for an effective quality control and improvement system [Hong Kong] : Dept. of Manufacturing Engineering, City University of Hong Kong, 1995. xi, 119 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995. |
|
TS156 .L34 2000 |
Lai, Alice Ming-wai. Investigation on quality education and training practice in HK manufacturing industries = 香港製造業品質管理訓練及需求 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. 122, [61] leaves : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
TS156 .L48 1997 |
Leung, Raymond Wai Man. Improving technical information services by quality function deployment approach Hong Kong : City University of Hong Kong, 1997. vii, 57, [11] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong. |
|
TS156 .L5 1996 |
Li, Yun-ming, M.Sc. Using system model and top down approach for implementing ISO 9001 for the international public switched telephone network (IPSTN) service Hong Kong : City University of Hong Kong, 1996. ix, 137 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TS156 .S6 1997 |
So, Mark Kin-ming. Customer-driven project management system for a car audio manufacturing company Hong Kong : City University of Hong Kong, 1997. viii, 72, [89] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
TS156 .T825 1999 |
Tse, William Wing-nam. Developing methodology to implement quality function deployment in an electronic manufacturing company = 如何推行品質功能擴展 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. xi, 68 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
TS156 .W36 1998 |
Wan, Siu-sang. To create an implementation framework model of total quality management for Hong Kong based PRC manufacturing companies in the Pearl River Delta (PRD) Hong Kong : City University of Hong Kong, 1998. iii, 3, [147] leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 1998. |
|
TS156 .W659 2003 |
Woo, Bryan Tak Man. Quality control information system design and implementation = 品質控制資訊系統設計及實行 2003. ix, 148 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2003. |
|
TS156 .W66 1998 |
Woo, Bryan Tak Man. Quality control information system (QCIS) design and implementation Hong Kong : City University of Hong Kong, 1998. 110, [43] leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 1998. |
|
TS156.2 .C46 1999 |
Chow, Wan-hoi. Effects of feedforward of defect percentage and performance feedback on inspection performance [Hong Kong] : [Dept. of Manufacturing Engineering and Engineering Management], City University of Hong Kong, 1999. vx, 210 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1999. |
|
TS156.2 .L58 2004 |
Lau, Wai Ming. Automated visual inspection of welded intersections in a welded galvanized steel wire fabric = 自動視像檢驗鍍鋅鋼絲焊網之鋼絲交接焊口 2004. vi, 50, [42] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2004. |
|
TS156.2 .L59 2009 |
Lee, Choi Hung. Differential magnification methods and interface factors for improving visual inspection performance = 用於提高目檢表現的差率放大方法及相關界面因素研究 2009. xiv, 204 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2009. |
|
TS156.2 .W66 1996 |
Wong, Hin-fu. Automated intelligent inspection strategy for surface mounted board Hong Kong : City University of Hong Kong, 1996. xi, 150 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1996. |
|
TS156.6 .C43 1993 |
Chan, Hing-yan. A quality management system for telecommunication system software quality assurance and maintenance [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1993. x, 114, [16] leaves 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1993 |
|
TS156.6 .C435 1995 |
Cheng, Siu-ping. Employee involvement strategies in ISO 9000 registration and maintenance [Hong Kong] : Dept. of Manufacturing Engineering, City Universityof Hong Kong, 1995. xii, 154, xxv leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995. |
|
TS156.6 .C44 2000 |
Chung, Wang-cheung. Modeling and implementation of an ISO 9000 quality control information system (IQCIS) [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. viii, 103 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
TS156.6 .H6 1997 |
Ho, Annbie Shuk-Yin. ISO9001 implementation in a small electronic products company : a critical evaluation Hong Kong : City University of Hong Kong, 1997. vi, 40, [19] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
TS156.6 .L35 1995 |
Lam, Kai-on. Product-Quality assurance expert system (P-Ques, version 1.0) [Hong Kong] : Dept. of Manufacturing Engineering, City University of Hong Kong, 1995. 50, [46] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995 |
|
TS156.6 .L43 2003 |
Li, Hiu Ching. Qualifying an advertising agency up to ISO 9001:2000 standard 2003. iii, 138 leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2003. |
|
TS156.6 .L564 1997 |
Lin, Keith Chun Kai. Getting Geoworks Marine Contractors Limited ready for ISO 9002 certification Hong Kong : City University of Hong Kong, 1997. vii, 96 leaves 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
TS156.8 .C425 2002 |
Chan, Ho Yan Implementation of quality control with the use of statistical process control in industry [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2002. x, 72 leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2002. |
|
TS156.8 .C43 1999 |
Chan, Richard Sik-keung. Computerised system for estimating the process time in a mould factory [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. x, 118 leaves. : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
TS156.8 .S536 1998 |
Shum, Kwok-fung. Design of a fault tolerant distributed flexible conveyor system Hong Kong : City University of Hong Kong, 1998. ix, [100] leaves : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 1998. |
|
TS157 .C46 1995 |
Choi, Tzi-chan Tony. Improving the manufacturing productivity of a medium-size mould making factory in China [Hong Kong] : Dept. of Manufacturing Engineering, City University of Hong Kong, 1995. x, 88 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995. |
|
TS157.5 .F86 1998 |
Fung, Cheung Kwan. Application of heuristic job scheduling system in a calibration laboratory Hong Kong : City University of Hong Kong, 1998. x, 100, [55] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
TS157.5 .K6 1996 |
Ko, Yat-ming. Heuristic scheduling with bottleneck dynamics applied in manufacturing shop floor Hong Kong : City University of Hong Kong, 1996. vi, 43, 7, 12 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TS157.5 .L43 1994 |
Lee, Chi-ching. Knowledge-based calibration scheduling system Hong Kong : Dept. of Manufacturing Engineering, City University of Hong Kong, 1994. 1 v. (various pagings) : ill. 30 cm. Thesis (M.A.)--City University of Hong Kong, 1994 |
|
TS157.5 .T365 1999 |
Tang, Siu-wa. Scheduling decision support system for power electronic assembly operations = 電源供應器工業的電子裝配工作編排系統 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. viii, 83 [44] leaves. : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
TS157.5 .W66 1999 |
Wong, Koon-hoo. Constraint-based scheduling in flexible manufacturing systems Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
TS157.5 .W665 2004e |
Wong, Siu-wai, M.Phil. Production scheduling system for a semiconductor manufacturing company in Hong Kong = 一香港晶片製造公司生產排序系統 2004. Thesis (M.A.)--City University of Hong Kong, 2004. |
|
TS157.5 .Y8 1998 |
Yu, Sze Wo. A production planning and scheduling system for a PCB drilling shop Hong Kong : City University of Hong Kong, 1998. ix, 72, [123] leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
TS160 .C48 1999 |
Chu, Wing-kuen. Inventory-production control model for a small size organization [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. viii, 79, 23, 12 leaves. : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
TS160 .L44 1998 |
Lee, Danny K. P. Modification and application of common safety stock strategies to inventory control management under unstable demands Hong Kong : City University of Hong Kong, 1998. vii, 54, [95] leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 1998. |
|
TS161 .W66 1994 |
Wong, Kwong-sang, Andy. An appraisal and development of a material requirements planning system at the Mass Transit Railway Corporation (MTRC), Hong Kong [Hong Kong] : Dept. of Manufacturing Engineering, City Polytechnic of Hong Kong, 1994. viii, 93, [20] leaves : ill. 30 cm. Thesis (M.Sc.)--City Polytechnic of Hong Kong, 1994 |
|
TS167 .C45 2000 |
Chu, Ngai-chi. Cost analysis of launching a new product from manufacturing point of view [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2000. vii, 34 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2000. |
|
TS167 .L85 1999 |
Lui, Hing-yau. Cost management system for new product development in a manufacturing organization in Hong Kong = Xiang-gang zhi zao shang zai chan pin fa zhan guo cheng zhong zhi cheng ben guan li xi tong [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. viii, 101 leaves. : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
TS168 .C43 1998 |
Cheung, Hon-keung. A study of the application of value engineering approach for productivity management in engineering services at China Light & Power (CLP) Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1998. 1 v. (various pagings) : ill. 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
TS168 .L48 1995 |
Leung, Chung-yin, Chaucer. The application of value engineering for productivity improvement at Hong Kong Telecom (HKTC) [Hong Kong] : City University of Hong Kong, Dept. of Manufacturing Engineering, 1995. viii, 79, [23] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995. |
|
TS169 .C43 2005 |
Chan, Chung Yin. Cost analysis modeling for reverse logistics = 逆向物流的成本分析建模 2005. ix, 124, [25] leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2005. |
|
TS170 .F66 2002 |
Fong, Yu Kai. Integrating advanced manufacturing technology to accomplish concurrent engineering in new product development 2002. ix, 86, h leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
TS170 .W66 2002 |
Wong, Kam Sing. Six sigma quality implementation framework for new product development = 以六標準差品質產品設計為目標的推行架構 2002. xi, 91 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
TS170.5 .T36 2001 |
Tang, Wai-man. Developing a design for environment (DFE) computer assessment programme for domestic products [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. 153 leaves. : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
TS171 .L35 2000 |
Lam, Wing-cheung. An integrated product design review tool = 整合性產品設計檢討工具 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. vii, 73, 14 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong. |
|
TS171 .L84 2000 |
Lui, Kim Ho. Reviewing existent product design process and produce a effective & efficent product design process for BDC International Limited = 檢討產品設計程序和提供有力及有效的產品設計程序於捷和百得製造廠 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. iii, 49, 3 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong. |
|
TS171.4 .C45 2001 |
Chan, Anita Wing Man. Apply total quality management concept in new product development (with the tool ISO 9000) = 應用全面品質管理槪念至新產品開發 (ISO 9000 為使用工具) [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. ix, 92 leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
TS171.4 .C46 2003 |
Chan, Allen Wai Chiu. A knowledge-based approach to robust design = 知識庫趨向之強健性設計 2003. xi, 92 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2003. |
|
TS171.4 .H83 2003 |
Wong, Amon Hung Man. An integrated information system related to product design in a Hong Kong based hard toy manufacturing company = 産品設計之資料整合系統於香港一間硬膠玩具製造公司 2003. xii, 124 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2003. |
|
TS171.4 .L38 2001 |
Lau, Chi Chiu. Preliminary development of automated rapid tooling process by metal arc spraying incorporated with STL file : investigation of surface roughness and dimensional accuracy of spray = 初步開拓利用金屬噴塗及 STL 檔案的自動調節快速模具工藝 : 塗層的表面粗糙及準確尺寸的探討分析 2001. xviii, [152] leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2001. |
|
TS172 .L465 1999 |
Leung, Kam-fai. Automatic tolerancing in the toggle clamping unit of injection moulding machine = 機鉸式注塑機公差自動釐定系統 [Hong Kong] : [Dept. of Manufacturing Engineering & Engineering Management], City University of Hong Kong, 1999. vii, 54, 44 leaves. : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
TS176 .B87 2002 |
But, Wing-chung. Development and implementation of adaptive slicing and selective hatching algorithms for FDM rapid prototyping = 可變層高及選擇性固化算法在 FDM 快速成型系統之實踐 2002. 217 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2002. |
|
TS176 .C43 1998 |
Chan, Kwok-kay. Timed colored petri net modeling and simulation of a shop floor in one-of-a-kind production (OKP) environment Hong Kong : City University of Hong Kong, 1998. vii, 78, [25] leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 1998. |
|
TS176 .C454 1998 |
Chiu, Kam Hon. A DFM based product design work flow model Hong Kong : City University of Hong Kong, 1998. x, 126, 23 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
TS176 .C6536 1999 |
Poon, Arnold Chin-lok. A Concurrent Product Development (CPD) model for Hong Kong/China manufacturing compaines [i.e. companies] = 香港/中國製造廠商應用併行產品開發技術硏究 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. x, 90 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
TS176 .J53 1999 |
Jiang, Zhibin. Petri Nets with Changeable structure for modeling and adaptive control of one-of-a-kind production systems [Hong Kong] : [Dept. of Manufacturing Engineering and Engineering Management], City University of Hong Kong, 1999. 1 v. (various pagings) : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 1999. |
|
TS176 .K66 1998 |
Kong, Ray Wai-man. Automated production plan system for watch industry Hong Kong : City University of Hong Kong, 1998. xi, 137, [112] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
TS176 .K6625 2008 |
Kong, Ray Wai-man. A multi-stage stochastic linear programming model for apparel production planning = 服裝生產計劃的多階段隨機線性規劃模型 2008. viii, 112 leaves : ill. 30 cm. Thesis (Eng.D.)--City University of Hong Kong, 2008. |
|
TS176 .L35 2003 |
Lam, Ming Chong. Implementation of concurrent engineering (CE) in small and medium-sized enterprises (SMEs) : case study = 并行工程於中小企業執行之個案研究 2003. xii, 126 leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2003. |
|
TS176 .T36 1996 |
Tang, Hing-ming Patrick. On the development of an intelligent database system for automating partner synthesis in virtual enterprise Hong Kong : City University of Hong Kong, 1995. v, 52 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TS176 .T73 1999 |
Tsang, Alan Hing-luen. A decision support system for manufacturing activity planning in a garment industry [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
TS176 .W658 1996 |
Wong, Kam-tong. Computer aided production planning and control for a batch manufacturing Hong Kong : City University of Hong Kong, 1996. 66, [28] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TS176 .W66 1996 |
Wong, Kwok-ho, M.Sc. A hybrid JIT/MRP production planning and control system Hong Kong : City University of Hong Kong, 1996. ix, 99, [25] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TS176 .Y58 1995 |
Yiu, Chi-wai, Kent. Manufacturing information system via local area network applied in a medium size factory [Hong Kong] : Dept. of Manufacturing Engineering, City University of Hong Kong, 1995. 108 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995 |
|
TS176 .Z43 1999 |
Zhao, Fuliang. A framework for cooperative computer-aided process planning [Hong Kong] : [Dept. of Manufacturing Engineering and Engineering Management], City University of Hong Kong, 1999. viii, 213 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 1999. |
|
TS176 .Z436 2008 |
Zhao, Jianbin. Engineering change management in product development : dynamic modeling and applications = 產品開發中的工程變更管理 : 動態建模及其應用 2008. xiv, 262 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2008. |
|
TS178 .L447 1998 |
Lee, Siu-kwong. Study on layout planning using graph theory and clustering technique Hong Kong : City University of Hong Kong, 1998. vii, [136] leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 1998. |
|
TS178 .L84 1998 |
Lue, Bo-wah Jacky. Computer-aided facilities design with graph theory for job shop layout Hong Kong : City University of Hong Kong, 1998. viii, 131 leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 1998. |
|
TS178.4 .A9 1997 |
Au, Yue-man. Hierarchical and modular modeling of Flexible Assembly Systems using Petri net [Hong Kong] : [Dept. of Manufacturing Engineering and Engineering Management], City University of Hong Kong, 1997. xi, 237 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1997. |
|
TS178.4 .C46 1994 |
Choi, Tin-yan. Joystick design for assembly [Hong Kong] : Dept. of Manufacturing Engineering, City University of Hong Kong, 1994. vii, 95 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1994 |
|
TS178.4 .D825 2003 |
To, Ka Wing. An evolutionary approach for the reconfiguration of an assembly-line system = 應用進化方法於設置裝配生産線系統 2003. xi, 104 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2003. |
|
TS178.4 .L48 2000 |
Leung, Man-ki. Research into reconfigurable assembly line system = 可重組裝配生產線系統的硏究 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. 108, A81 leaves ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2000. |
|
TS178.4 .T36 1996 |
Tang, Ping-hung. Graphical user interface design for a button cell assembly line controller Hong Kong : City University of Hong Kong, 1996. viii, 110 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TS178.4 T75 1997 |
Tse, Chung Ling. The development of a PC based high frequency handler Hong Kong : City University of Hong Kong, 1997. xi, 72, [11] leaves : ill. (some col.) 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
TS180 .H84 2001 |
Hui, Richard Wai Cheong. Reduction of failures in material handling systems through diagnosis of historical cases = 通過診斷歷史個案從而減低物流處理系統之失誤 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. x, 5, 86 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
TS180 .Y48 1997 |
Yeung, Chiu Leung. Selection of unit handling conveyors Hong Kong : City University of Hong Kong, 1997. xii, 92, [50] leaves : ill. 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
TS180.3 .W36 2003 |
Wong, Chun Keung. Vibration analysis of a stacker crane by using continuous wavelet transform = 設計連續小波變換用於載貨機的震動訊號分析 2003. xi, 93 leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2003. |
|
TS183 .L5 2001 |
Li, Chan Pang. Environmental impact evaluation of manufacturing processes = 製造過程對環境影響的評價 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. xi, 120 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2001. |
|
TS183 .Z46 2002 |
Zhou, Yuejin. A study of shopfloor tacit knowledge acquisition in China's manufacturing enterprises = 中國製造企業車間層實用知識獲取研究 2002. vii, 140 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2002. |
|
TS183.3 .W66 2005 |
Wong, Francis Seung Yin. Case-based reasoning for computer-aided inspection process planning = 案例推理法式電腦輔助維檢工序規劃的研究 2005. xi, 249 leaves : ill. 30 cm. Thesis (Ph.D.)--City University of Hong Kong, 2005. |
|
TS183.3 .Y48 2002 |
Yeung, Chui Wa Investigation of the product development process for the manufacturing of new thermal cover products [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2002. xi, 193 leaves : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2002. |
|
TS189.6 .C45 2000 |
Chow, Wan-man. Development of a prototype system for a warehouse maintenance = 發展貨倉維修的資訊糸 [i.e.系] 統 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong. |
|
TS191 .C45 2006 |
Cheuk, Nga Lun. Modularized web-based maintenance system for enhanced efficiency and security = 強化了的安全及模組性之網際遙距設備維護系統 2006. xiii, 170 leaves : ill. (some col.) 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2006. |
|
TS191 .H84 1995 |
Hui, Koc-on, Alex. A computer vision tracking system for automatic guided vehicles [Hong Kong] : Dept. of Manufacturing Engineering, City University of Hong Kong, 1995. vi, 59, 28 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995 |
|
TS191 .M34 2001 |
Makatchev, Maxim. Computational issues on design and implementation of an autonomous guided vehicle [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2001. xiv, 161 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2001. |
|
TS191 .W66 2003 |
Woo, Derek Pang Kwong. Software development of Maintenance Scheduler with ISO standards database 2003. vii, 74, 14, [86] leaves : col. ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 2003. |
|
TS192 .C43 1994 |
Cheng, Kai-man. Embedding artificial intelligent techniques into the maintenance management system [Hong Kong] : Dept. of Manufacturing Engineering, City University of Hong Kong, 1994. x, 82, 16, 27, 6, 13 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1994 |
|
TS192 .C435 1998 |
Cheung, Kui-shing. Using CMMS to improve the preventive maintenance planning & scheduling in a paper mill [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1998. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1998. |
|
TS192 .N45 1999 |
Ng, Wai-Keung. Implementation and evaluation of total productive maintenance (TPM) : a case study in a Hong Kong manufacturing company = 推行及驗証全員生產力保養於香港之生產公司 Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1999. viii, 121 leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong. |
|
TS192 .P86 2003 |
Pun, Sun Keung. Evaluation on the maintenance strategies of the E & M maintenance department of a large multi-purposes complex building by applying "Reliability Centered Maintenance (RCM)" concepts = 運用"可靠為本保養"概念去評估一座大型多用途複合大樓的機電維修部的保養策略 2003. vi, 85 leaves : ill. (some col.) 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2003. |
|
TS192 .W69 1999 |
Wong, Chi-wah. Establishment and implementation of an integrated maintenance management system for HKUST = 香港科技大學綜合維修管理系統的創立與實踐 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 1999. xiv, 123 leaves. : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1999. |
|
TS192 .W73 2003 |
Wong, Nelson Wei. How total productive maintenance brings benefits to a company : a case study on Mass Transit Railway Corpration Limited total depot operation implementation 2003. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2003. |
|
TS193 .C44 1995 |
Chiu, Chi-man. Housekeeping for a medium size manufacturing company [Hong Kong] : Dept. of Manufacturing Engineering, City University of Hong Kong, 1995. xi, 93 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995. |
|
TS195.2 .L48 1995 |
Leung, Wai-chuen. To develop a decision support system (DSS) for equipment selection in semiconductors packaging operation [Hong Kong] : Dept. of Manufacturing Engineering, City University of Hong Kong 1995. xiii, 119, [31] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995 |
|
TS205 .L35 1997 |
Lam, Yat Wah. A generic environment to evaluate material flow and interfacial properties for use in modelling of metal forming processes = Jin shu cheng xing guo cheng jian mo de Tong yong huan jing : cai liao liu dong yu jie mian te xing yan jiu = 金屬成型過程建模的通用環境 : 材料流動與界面特性硏究 Hong Kong : City University of Hong Kong, 1997. 1 v. (various paging) : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1997 |
|
TS250 .E53 2002 |
Emani, Venkata Rama Krishna Mohan. A vision integrated methodology for the evaluation of sheet metal properties with a unified tension test, for use in the modelling of forming limits 2002. xiv, [170] leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2002. |
|
TS253 .C45 2000 |
Cheung, Ka-ho. A knowledge-based CAD system for the blanking of sheet metal products Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. 111 p. : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 1999. |
|
TS653.5 .L58 2004 |
Lau, Yin Ki. A thresholding method for image analysis of reflective metallic surfaces = 應用於反光金屬面之影像分析的二値化方法 2004. xi, 123 leaves : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2004. |
|
TS670 .L38 1998 |
Lau, Eric Koon-wa. Simulation of current distribution in an electrochemical plating process using boundary elements Hong Kong : City University of Hong Kong, 1998. 71, [80] leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 1998. |
|
TS1483 .Y48 1996 |
Yeung, Hoi-hung Eddie. Intelligent decision support system (IDSS) for spinning mill diagnosis and maintenance management Hong Kong : City University of Hong Kong, 1996. vii, 97, 44 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
TS2301.T7 M36 1995 |
Manjunath, Madhugiri Lakshman Rao. A knowledge based system for developing tool plans for new toys [Hong Kong] : Dept. of Manufacturing Engineering, City University of Hong Kong, 1995. viii, 92, [25] leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1995. |
|
TS2301.T7 Y48 2005 |
Yeung, Chui Wa. An investigation of the sentiments of having a dog : inspirations for the design of a toy dog = 擁有寵物犬情感的調查報告 : 對玩具犬設計的啓發 2005. xv, 320 leaves : ill. (some col.) 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 2005. |
|
TT209 .C45 2000 |
Cheng, Po-hang. Estimation of surface error by cutting forces in end milling Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. 84, [2], 60 leaves : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
TT209 .L35 2000 |
Lam, Joyce Yin-hung. Prediction on end milling using neural networks Hong Kong : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2000. 127, [39] leaves : ill. (some col.) 30 cm. Thesis (M.Eng.)--City University of Hong Kong. |
|
TT209 .L36 1998 |
Law, Kris Mo-yin. Process design for error compensation in end milling of pocket = 直立銑刀洞穴切削誤差補償的程序設計之硏究 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 1998. 1 v. (various pagings) : ill. 30 cm. Thesis (M.Phil.)--City University of Hong Kong, 1998. |
|
TT496.H85 L48 2001 |
Leung, Yiu-sing. Automation strategies for the Hong Kong apparel manufacturers = 香港成衣製造商的自動化策略. [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. xi, 122 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
|
TT690 .A9 1997 |
Au, Ka Keung. Developing a teaching package for the automation of knitwear design in Hong Kong Hong Kong : City University of Hong Kong, 1997. x, 146, [28] leaves : ill. 31 cm. Thesis (M.Sc.)--City University of Hong Kong, 1997. |
|
TX657.S6 C45 2002 |
Chu, Lanois Ka Kuen. An investigation of towngas domestic burner to handle natural gas = 硏究天然氣用於家庭式煤氣爐 [Hong Kong] : Dept. of Manufacturing Engineering and Engineering Management, City University of Hong Kong, 2002. iii, 100, [3], xvi leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2002. |
|
TX945 .W64 1998 |
Wo, Hung-hing. Automatic ordering and payment system for fast food services Hong Kong : City University of Hong Kong, 1998. v, [194] leaves : ill. 30 cm. Thesis (M.Eng.)--City University of Hong Kong, 1998 |
|
UC405.H6 T35 1996 |
Tam, Wing-keung. Maintenance management information system for military premises in Hong Kong government Hong Kong : City University of Hong Kong, 1996. ix, 115 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
VK200 .Y48 1996 |
Yeung, Po-kwong. Enhancing safe operations of ship and environmental protection by safety management system Hong Kong : City University of Hong Kong, 1996. 78, [51] leaves 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 1996. |
|
Z462.86.H85 C45 2001 |
Chong, Chor For. Critical successful factors (CSF) of Chinese Books Cyberstore Ltd. = 網上書店的成功因素 [Hong Kong] : Dept. of Manufacturing Engineering & Engineering Management, City University of Hong Kong, 2001. xi, 66 leaves : ill. 30 cm. Thesis (M.Sc.)--City University of Hong Kong, 2001. |
